SCULPFUN S9 Laser Engraver Machine User Manual

Важна информация за безопасност

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Always read and understand all instructions before use.

• Защита на очите: Always wear the provided laser safety glasses when the machine is in operation. The laser filter cover on the S9 filters 98% of ultraviolet light, but direct exposure can still cause severe eye damage.
• Опасност от пожар: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Ensure a fire extinguisher is readily available.
• Вентилация: Работете с машината в добре проветриво помещение, за да разсеете изпаренията и дима, образувани по време на гравиране/рязане.
• Безопасност на материала: Only engrave or cut materials specified as safe. Some materials can produce toxic fumes or catch fire easily.
• Защита на работната повърхност: Use the A4 steel pad provided to protect your work surface from laser damage and to isolate potential fire risks.
• Авариен стоп: Familiarize yourself with the location of the emergency power switch on the S9 machine for immediate shutdown.

The laser module features a protective cover to help filter harmful light, enhancing eye safety during operation.

A safety metal pad is included to protect your table from laser penetration and reduce fire risks.

Продуктът е свършилview

The SCULPFUN S9 is a high-performance laser engraver and cutter designed for precision work on a variety of materials. It features advanced laser beam shaping technology, an all-metal structure for stability, and a user-friendly fixed-focus design.

The SCULPFUN S9 machine, showcasing its robust design and examples of its engraving and cutting capabilities on different materials.

Ключови характеристики

• Laser Beam Shaping Technology: Utilizes a 5.5W diode laser with an ultra-fine 0.06mm laser focus, providing a 90W CO2 laser effect for strong cutting penetration and fine engraving.
• Висока точност: Achieves an engraving precision of 0.01mm, allowing for incredibly detailed work.
• Fixed-Focus Design: Features a combination of a fixed-focus lens and a sliding design for quick and easy focusing by simply moving the laser and tightening screws.
• Robust All-Metal Structure: Ensures extreme sturdiness and enhances engraving accuracy, designed for quick assembly within 10-20 minutes.
• Голяма площ за гравиране: Offers a generous 410mm x 420mm working area to accommodate various project sizes.
• Широка съвместимост: Supports popular engraving software such as LaserGRBL, LightBurn, Benbox, Grbl Controller, and LiteFire, compatible with Windows and MAC systems, and various file formats (JPG, PNG, DXNF, SVG, G-Code, BC, BMP).

Подробно view of the laser module, emphasizing its advanced laser beam shaping technology for superior performance.

Visual comparison illustrating the thinner, more effective energy range of the S9 laser compared to an ordinary square laser.

A magnified image demonstrating the ultra-thin, high-precision engraving line capability of the S9, as fine as 0.08mm.

Сглобяване и настройка

The SCULPFUN S9 is designed for quick and straightforward assembly. Follow these general steps to set up your machine:

1. Разопаковайте компоненти: Carefully remove all parts from the packaging and verify against the packing list.
2. Сглобяване на рамката: Свържете алуминиевия професионалистfiles to form the main frame of the engraver. The design allows for rapid assembly, typically within 10-20 minutes.
3. Инсталиране на лазерен модул: Mount the laser module onto the gantry. Ensure it is securely fastened.
4. Свързване на кабели: Attach all necessary power and data cables according to the provided diagrams.
5. Включване: Connect the power adapter and turn on the machine using the main power switch.

Visual guide illustrating the simple, step-by-step assembly process for the SCULPFUN S9.

Фокусиране на лазера

The S9 features a fixed-focus laser combined with a sliding design for easy focusing. To set the focus:

1. Place the material to be engraved or cut on the work surface.
2. Move the laser module down until the fixed-focus spacer (usually a small metal cylinder) touches the material surface.
3. Tighten the screws on the laser module to secure it in this position.
4. Remove the fixed-focus spacer. The laser is now correctly focused for your material.

Operating the SCULPFUN S9

Софтуерна съвместимост

The SCULPFUN S9 is compatible with a wide range of sophisticated engraving software, offering flexibility for your projects:

• Лазер GRBL
• LightBurn (supports MAC system)
• Бенбокс
• Grbl Controller
• LiteFire

It supports PWM engraving mode and various file formats including JPG, PNG, DXF, SVG, G-Code, BC, and BMP.

The SCULPFUN S9 offers broad compatibility with popular laser engraving software, enhancing user flexibility.

Поддържани материали

The S9 can engrave and cut a diverse range of materials:

• Материали за гравиране: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, black stone.
• Материали за рязане: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, certain plastic boards.

A visual display of the SCULPFUN S9's versatility, showing successful engraving and cutting on a wide array of materials.

Images demonstrating the S9's impressive cutting capabilities on thick materials like 15mm wood, 10mm plywood, and 10mm acrylic.

Основни стъпки на работа

1. Подгответе своя дизайн: Create or import your design using your chosen engraving software. Adjust settings such as power, speed, and passes according to your material and desired outcome.
2. Материал на мястото: Securely place your material on the work surface, ensuring it is flat and within the engraving area. Use the A4 steel pad underneath.
3. Set Focus: Follow the fixed-focus procedure described in the Setup section to ensure optimal laser focus.
4. Свържете машината: Connect the engraver to your computer via USB.
5. Начало на операцията: Initiate the engraving or cutting process from your software.
6. Наблюдение на напредъка: Stay near the machine and monitor the process for any issues, especially fire hazards.
7. Изключване: Once the process is complete, turn off the machine and disconnect it from the power source.

Поддръжка и грижа

Редовната поддръжка осигурява дълготрайността и оптималната производителност на вашия лазерен гравер SCULPFUN S9.

• Чиста лазерна леща: Периодично почиствайте лазерната леща с мека кърпа без власинки и разтвор за почистване на лещи, за да поддържате мощността и прецизността на лазера.
• Inspect Belts and Rails: Check the tension of the timing belts and ensure the guide rails are clean and free of debris. Lubricate rails if necessary, using appropriate lubricant.
• Общо почистване: Keep the machine free of dust and material residue. Use compressed air to clean hard-to-reach areas.
• Актуализации на фърмуера: Проверете на производителя website for any available firmware updates to ensure your machine runs with the latest improvements.

Отстраняване на често срещани проблеми

Този раздел предоставя решения на често срещани проблеми, с които може да се сблъскате.

Технически спецификации

Гаранция и поддръжка на клиенти

The SCULPFUN S9 Laser Engraver Machine comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's webсайт за конкретни гаранционни условия.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (S9) handy when contacting support.