Moimhear Upholstered Bed 140 x 200 with Hydraulic Storage

1. Въведение

Thank you for choosing the Moimhear Upholstered Bed with Hydraulic Storage. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The Moimhear Upholstered Bed 140 x 200, featuring a grey upholstered finish and a high headboard.

2. Инструкции за безопасност

To ensure safe use and prevent injury, please observe the following safety guidelines:

• Ограничение на теглото: Do not exceed the maximum weight capacity of 300 kg (661 lbs) for the bed.
• Сглобяване: Assembly should be performed by at least two adults. Keep children and pets away from the assembly area.
• Стабилна повърхност: Always assemble and use the bed on a flat, stable, and level surface.
• Редовни проверки: Периодично проверявайте всички болтове, винтове и съединения, за да се уверите, че са здраво затегнати. Затегнете отново, ако е необходимо.
• Хидравличен механизъм: Exercise caution when operating the hydraulic lift mechanism. Keep hands and fingers clear of moving parts.
• Вентилация: Ensure adequate ventilation when storing items in the bed's storage compartment.

3. Съдържание на пакета

Преди сглобяване, проверете дали всички компоненти са налични и не са повредени. Ако някои части липсват или са повредени, моля, свържете се с отдела за обслужване на клиенти.

• Тапицирана табла
• Странични релси (ляво и дясно)
• Подножка
• Основа за легло с летви
• Hydraulic Lift Mechanism (Gas Struts and Frame)
• Задържаща лента за матрак
• Пакет с хардуер (винтове, болтове, шайби, шестостенен ключ)
• Non-woven Fabric Base for Storage
• Инструкции за сглобяване

4. Настройка (Монтаж)

Follow the step-by-step assembly instructions provided in the separate manual included with your product. The following general guidelines apply:

1. Приготвяне: Освободете просторно място за монтаж. Поставете всички компоненти върху мека, чиста повърхност, за да предотвратите надраскване.
2. Табла и табла за краката: Прикрепете страничните парапети към таблата и долната част на леглото, като използвате предоставените монтажни елементи. Не затягайте винтовете напълно, докато цялата рамка не е сглобена.
3. Хидравличен механизъм: Carefully install the hydraulic lift mechanism and the slatted bed base according to the instructions. Ensure the gas struts are correctly oriented and securely fastened.
4. База за съхранение: Place the non-woven fabric base at the bottom of the storage compartment.
5. Окончателно затягане: Once all parts are in place and aligned, fully tighten all screws and bolts.

Image 4.1: Assembly diagram with key dimensions and components of the bed frame and hydraulic lift system.

Изображение 4.2: Подробности view of the hydraulic lift mechanism and slatted base during assembly.

5. Инструкции за работа

This bed features a hydraulic lift mechanism for convenient under-bed storage.

5.1 Accessing Storage

1. Премахване на матрака: For easier lifting, remove the mattress from the bed. While the hydraulic system is designed to assist, removing the mattress reduces the initial effort.
2. Lift Bed Base: Locate the mattress retainer bar at the foot of the bed. Grasp the bar firmly and lift the slatted bed base upwards. The hydraulic gas struts will assist in lifting and holding the base in an open position.
3. Достъп до хранилище: Once the bed base is fully open, you can access the spacious storage compartment underneath.

5.2 Closing Storage

1. Clear Compartment: Ensure no items are obstructing the closing mechanism.
2. Lower Bed Base: Gently pull the bed base downwards. You may need to apply some force to overcome the hydraulic pressure initially. Guide the base down until it rests securely on the frame.
3. Replace Mattress: Place the mattress back onto the bed base.

Image 5.1: The bed with its hydraulic storage compartment open, revealing ampмясто за съхранение на различни предмети.

Image 5.2: Detail of the metal bar designed to retain the mattress when the bed base is lifted.

6. Поддръжка

Proper maintenance will extend the life and appearance of your Moimhear Upholstered Bed.

• Почистване: The flannel upholstery can be cleaned with a damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which may damage the fabric.
• Инспекция на рамката: Periodically inspect the bed frame for any signs of wear or damage. Ensure all structural components are intact.
• Проверка на хардуера: Regularly check and retighten all screws, bolts, and connections to maintain stability and prevent squeaking.
• Хидравлична система: Do not attempt to lubricate or disassemble the hydraulic gas struts. If the mechanism malfunctions, contact customer support.
• Вентилация: If storing items in the compartment, occasionally air out the space to prevent moisture buildup.

7. Отстраняване на проблеми

Ето решения на често срещани проблеми, с които може да се сблъскате:

8. Спецификации

9. Гаранция и поддръжка

For warranty information and customer support, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.