WORKPRO 3.6V Cordless Hot Glue Gun User Manual

Въведение

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Информация за безопасност

• Always keep the glue gun away from children.
• Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
• Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
• Уверете се, че работната зона е добре проветрена.
• Do not leave the hot glue gun unattended when it is powered on.
• Unplug or power off the glue gun when not in use or before performing any maintenance.
• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Allow the equipment to cool down completely before packing it away.
• This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Съдържание на пакета

Моля, проверете съдържанието на пакета, за да се уверите, че всички артикули са налични и не са повредени:

• 1 x WORKPRO 3.6V Cordless Hot Glue Gun
• 20 x Mini Glue Sticks (0.27" Dia)
• 1 x Type-C кабел за зареждане
• 1 x Ръководство за потребителя (този документ)

Продуктът е свършилview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

• Дюза: Dispenses melted glue.
• Превключвател за включване/изключване: Включва и изключва устройството.
• Glue Stick Entry: Where glue sticks are inserted.
• LED индикатор: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
• Trigger Lever: Activates glue dispensing.
• Порт за зареждане Type-C: За свързване на кабела за зареждане.
• Retractable Stand-up Base: Provides stability when the gun is not in use.

Настройка

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

1. Locate the Type-C charging port on the glue gun.
2. Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
3. LED индикаторът ще свети в червено по време на зареждане и ще светне в зелено, когато е напълно зареден.

Инструкция за работа

Follow these steps to operate your hot glue gun:

1. Поставете лепило: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
2. Включване: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
3. Предварително загряване: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
4. Нанесете лепило: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
5. Автоматично изключване: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

Важни бележки:

• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Изключете оборудването и го оставете да изстине напълно, преди да го опаковате.
• The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Поддръжка

• Почистване: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• Грижа за дюзите: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
• Съхранение: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
• Грижа за батерията: За оптимален живот на батерията, избягвайте честото ѝ пълно разреждане. Зареждайте я редовно, дори и да не я използвате постоянно.

Отстраняване на неизправности

Спецификации

Гаранция и поддръжка

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO Store