1. Важни инструкции за безопасност
Read and understand all safety warnings and instructions before operating this electric hoist. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.
1.1 Обща безопасност
- Винаги носете подходящи лични предпазни средства (ЛПС), включително предпазни очила, ръкавици и здрави обувки.
- Ensure the work area is clear of obstructions, well-lit, and free from unauthorized personnel.
- Не работете с телфера под въздействието на наркотици, алкохол или лекарства.
- Inspect the hoist for damage before each use. Do not operate if damaged.
- Keep hands and body clear of moving parts and the load during operation.
1.2 Електрическа безопасност
- Connect the hoist only to a properly grounded power outlet with the specified voltagд (220V).
- Do not expose the hoist to rain or wet conditions.
- Никога не използвайте захранващия кабел за носене, дърпане или изключване на телфера от контакта.
- Уверете се, че всички електрически връзки са сигурни и без повреди.
1.3 Безопасност при повдигане
- Never exceed the rated load capacity of the hoist (125 kg for single cable, 250 kg for double cable).
- Ensure the load is properly balanced and securely attached to the hook.
- Do not lift people or objects over people.
- Избягвайте внезапни потегляния или спирания при повдигане или спускане на товар.
- Use the emergency stop switch immediately if an unsafe condition occurs.
2. Продуктът свършиview
The VEVOR Electric Wire Rope Hoist PAYX250-2 is designed for lifting heavy objects in various environments such as garages, warehouses, and factories. It features a robust pure copper motor, a durable steel wire rope, and a wired remote control for safe operation.
Фигура 2.1: Основен view of the VEVOR Electric Wire Rope Hoist, highlighting its compact design and robust construction.
Figure 2.2: The electric hoist installed in a typical garage environment, demonstrating its application for lifting tasks.
2.1 ключови компонента
- Мотор: Pure copper motor with a cooling fan for efficient and prolonged operation.
- Тел въже: Durable braided steel cable (Φ 3 mm * L 12 m, 19 strands).
- Кука: Alloy steel hook for secure load attachment. Includes a double hook for increased capacity.
- Дистанционно управление: Wired remote with a 4m cable for safe operation from a distance, featuring an emergency stop button.
- Монтажни скоби: Two channel mounting brackets for easy installation.
- Функции за безопасност: Emergency stop switch and electromagnetic braking system to prevent accidental slippage and overturning.
3. Настройка
Proper installation is crucial for safe and effective operation of the hoist.
3.1 Монтиране на подемника
- Select a sturdy overhead beam or crossbar capable of supporting the hoist's weight and the maximum intended load.
- Attach the two provided channel mounting brackets to the hoist.
- Securely mount the hoist to the chosen overhead structure using appropriate fasteners. Ensure the brackets are tightly fastened to prevent movement during operation.
Figure 3.1: Illustration of the metal adjustable fixing rings (mounting brackets) and their dimensions for secure installation.
3.2 Електрическо свързване
- Ensure the power supply matches the hoist's voltage requirement (220V).
- Plug the hoist into a grounded electrical outlet. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the hoist's power requirements.
3.3 Cable Configuration (Single vs. Double Line)
The hoist can be configured for single or double line lifting, affecting its capacity and lifting speed.
- Single Cable: Provides higher lifting height and speed (40 ft/12 m, 33 ft/min) with a capacity of 125 kg.
- Double Cable: Achieved by using the provided pulley hook, which doubles the lifting capacity to 250 kg but halves the lifting height and speed (19.7 ft/6 m, 16 ft/min).
Figure 3.2: Comparison of single cable setup (left) for higher speed and height, and double cable setup (right) using a pulley hook for increased lifting capacity.
4. Инструкции за работа
Следвайте тези стъпки за безопасна и ефективна работа на вашия електрически телфер.
4.1 Използване на дистанционното управление
The hoist is operated via a wired remote control, allowing you to maintain a safe distance from the load.
Figure 4.1: The multi-functional remote control handle with its 14ft (approx. 4m) cable, featuring an emergency stop button.
- Бутон нагоре: Press and hold to lift the load.
- Бутон надолу: Press and hold to lower the load.
- Бутон за аварийно спиране: Press the large red button to immediately stop all hoist operations in an emergency. Twist to reset.
- Always operate the hoist from a position where you have a clear view of the load and the surrounding area.
4.2 Lifting Procedures
- Before lifting, ensure the load is within the hoist's capacity and is securely attached to the hook.
- Slowly lift the load a few inches off the ground to check for balance and stability.
- If the load is stable, proceed to lift it to the desired height. Avoid swinging the load.
- When lowering, do so slowly and steadily. Guide the load if necessary, keeping hands clear.
- Никога не оставяйте окачен товар без надзор.
5. Поддръжка
Редовната поддръжка гарантира дълготрайността и безопасната работа на вашия телфер.
5.1 Редовна проверка
- Тел въже: Inspect the wire rope for kinks, fraying, corrosion, or broken strands before each use. Replace if any damage is observed.
- Кука: Check the hook for deformation, cracks, or excessive wear. Ensure the safety latch operates correctly.
- Мотор и корпус: Inspect for any visible damage, loose fasteners, or unusual noises during operation.
- Electrical Cable and Remote: Check for cuts, abrasions, or damage to the power cord and remote control cable.
5.2 Почистване и съхранение
- Keep the hoist clean and free from dirt, dust, and debris. Use a dry cloth to wipe down surfaces.
- Store the hoist in a dry, clean, and secure location away from moisture and extreme temperatures.
6. Отстраняване на проблеми
Вижте този раздел за често срещани проблеми и техните потенциални решения.
| проблем | Възможна причина | Решение |
|---|---|---|
| Подемникът не работи | Няма захранване Включено аварийно спиране Активирана защита от претоварване на двигателя | Проверете захранващата връзка и контакта Освободете бутона за аварийно спиране Allow motor to cool down, reduce load |
| Необичаен шум по време на работа | Разхлабени компоненти Липса на смазване Вътрешни повреди | Проверете за разхлабени части и ги затегнете Консултирайте се с квалифициран техник Discontinue use and seek professional service |
| Load slips or drops | Неизправност на спирачката Претоварване | Discontinue use immediately and contact service Ensure load is within capacity |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, contact VEVOR customer support.
7. Спецификации
Technical data for the VEVOR Electric Wire Rope Hoist PAYX250-2.
Figure 7.1: Detailed product dimensions and a summary of key specifications.
| Параметър | Стойност |
|---|---|
| Номер на модела | PAYX250-2 |
| Lifting Load Capacity (Single Cable) | 125 кг (275 фунта) |
| Lifting Load Capacity (Double Cable) | 250 кг (550 фунта) |
| Lifting Height (Single Cable) | 12 м (40 фута) |
| Lifting Height (Double Cable) | 6 м (19.7 фута) |
| Lifting Speed (Single Cable) | 10 м/мин (33 фута/мин) |
| Lifting Speed (Double Cable) | 5 м/мин (16 фута/мин) |
| Мощност на двигателя | 510 W |
| Voltage | 220 V |
| Размер на кабела | Φ 3 mm * L 12 m (19 strands) |
| Размери на продукта (Д x Ш x В) | 350 x 135 x 160 mm (13.8 x 5.3 x 6.3 инча) |
| Тегло на продукта | 10.35 кг (22.82 фунта) |
| Режим на управление | Кабелно дистанционно управление |
| Номинална скорост на въртене | 2800 об/мин |
| Номинален въртящ момент | 1.1 Нм |
Figure 7.2: Diagram illustrating the internal motor components and the cooling fan designed for heat dissipation.
8. Гаранция и поддръжка
Продуктите на VEVOR са проектирани за издръжливост и производителност. За информация относно гаранцията, техническа поддръжка или запитвания за сервиз, моля, вижте гаранционната карта, включена в продукта, или посетете официалния уебсайт на VEVOR. webсайт. Запазете касовата си бележка като доказателство за покупка.
