Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. Въведение

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. Информация за безопасност

ПРЕДУПРЕЖДЕНИЕ: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:

• Уверете се, че захранването е изключено от контакта с променливотоково захранване, преди монтаж, демонтаж или каквато и да е поддръжка.
• Това захранване е предназначено само за употреба в компютърни системи. Не го използвайте за никакви други цели.
• Не отваряйте захранващия блок. Високо напрежениеtagВътре има налични дефекти и няма части, които потребителят може да обслужва. Отварянето на устройството ще анулира гаранцията.
• Инсталирайте захранващия блок в добре проветриво място, далеч от източници на топлина, пряка слънчева светлина и влага.
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• Уверете се, че всички конектори са здраво закрепени, преди да включите системата.
• Да се ​​пази от деца.

Характеристики на защитата: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Защита от претоварване): Prevents damage from excessive total power output.
• OVP (Над обемtage Защита): Safeguards components from voltagд шипове.
• UVP (Под томtage Защита): Предпазва от недостатъчен обемtage доставка.
• SCP (Защита от късо съединение): Предпазва от повреди от късо съединение.
• OCP (Защита от свръхток): Protects against excessive current on individual rails.
• OTP (защита от прегряване): Изключва устройството, ако вътрешните температури станат твърде високи.
• Защита без натоварване: Ensures stable operation even without a load.
• Защита от нулиране: Allows the unit to recover safely after a protection event.

3. Съдържание на пакета

Проверете дали всички артикули са налични във вашия пакет:

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1x ръководство за инсталиране
• 1x PSU bag
• 1x Zip tie bag
• 1x пакет с винтове
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4. Продуктът свършиview

4.1 Основни характеристики

• 1200W DC Output: Осигурява ample power for high-performance systems.
• 80 PLUS платинен сертификат: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• Готов за ATX 3.0 и PCIe 5.0: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• Напълно модулен дизайн: Allows for custom cable selection and improved cable management. Cables are sold separately.
• 135mm Fluid Dynamic Bearing (FDB) Fan: Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 Physical Dimensions and Components

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

Отпред View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

Заден панел

Revolt Series Comparison

5. Настройка и инсталация

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1 Подготовка за инсталиране

1. Gather Components: Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. Статично разреждане: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 Installing the Power Supply

1. Монтиране на захранващия блок: Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. Свържете модулните кабели: This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. Маршрутни кабели: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. Свързване с компоненти: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. AC захранващ кабел: Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. Инструкции за работа

6.1 Първоначално включване

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. Power on your computer system using the case's power button.

6.2 Hybrid Fan Control

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• Режим „Винаги включен“: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7. Отстраняване на проблеми

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• Без захранване:
  • Уверете се, че захранващият кабел е здраво свързан както към захранващото устройство, така и към контакта.
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• Нестабилност на системата/Случайни изключвания:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• Вентилаторът не се върти:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• Миризма на изгоряло или дим:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support webсайт или се свържете с тяхното обслужване на клиенти.

8. Спецификации

9. Гаранция и поддръжка

9.1 Гаранция на производителя

The Phanteks Revolt 1200W Power Supply Unit is covered by a 1-годишна гаранция от производителя от датата на покупка. Тази гаранция покрива дефекти в материалите и изработката при нормална употреба. Моля, запазете доказателството си за покупка за предявяване на гаранционни претенции.

Гаранцията не покрива щети в резултат на:

• Неправилен монтаж или работа.
• Неразрешени модификации или ремонти.
• Accidental damage, abuse, or misuse.
• Natural disasters or external causes.

Opening the power supply unit will void the warranty.

9.2 Техническа поддръжка

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks webсайт или се свържете с тяхната поддръжка на клиенти:

Поддръжка на Фантекс Webсайт

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.