CJ TECH 750mA Automatic Float Battery Charger/Maintainer (Model 25305-EV) User Manual

Въведение

This manual provides detailed instructions for the safe and effective use of your CJ TECH 750mA Automatic Float Battery Charger/Maintainer, Model 25305-EV. This device is designed to charge and maintain 6V and 12V lead-acid batteries, including AGM and GEL types, ensuring optimal battery performance and extending battery life. Please read this manual thoroughly before operation and retain it for future reference.

Информация за безопасност

ПРЕДУПРЕЖДЕНИЕ: Прочетете всички предупреждения и инструкции за безопасност. Неспазването на предупрежденията и инструкциите може да доведе до токов удар, пожар и/или сериозно нараняване.

• Винаги работете със зарядното устройство в добре проветриво помещение.
• Avoid sparks, flames, or smoking near the battery during charging, as batteries can produce explosive gases.
• Носете предпазни очила и защитно облекло, когато работите с батерии.
• Disconnect the AC power supply before making or breaking connections to the battery.
• This charger is designed for 6V and 12V lead-acid batteries only. Do not use it to charge dry-cell batteries that are commonly used with home appliances, as these may burst and cause injury to persons and damage to property.
• Keep the charger and its components out of reach of children.
• The charger has an IP64 water-resistant rating, meaning it is protected from dust and splashing water. It is not designed to be submerged in water.
• Не използвайте зарядното устройство, ако е получило силен удар, е било изпускано или е повредено по друг начин.

Съдържание на пакета

Проверете дали всички артикули са налични във вашия пакет:

• CJ TECH 750mA Automatic Float Battery Charger/Maintainer Unit
• Батерия Clamp Конектор
• Конектор на пръстенния терминал

Image: The CJ TECH 750mA Automatic Float Battery Charger unit shown with its two interchangeable connection accessories: battery clamps и пръстеновидни клемни конектори.

Продуктът е свършилview

The CJ TECH 750mA Automatic Float Battery Charger/Maintainer is a compact and durable device designed for efficient battery care. It features automatic voltage detection and multiple safety protections.

LED индикатори

• ЧЕРВЕН светодиод: Показва, че батерията се зарежда в момента.
• ЗЕЛЕН LED: Indicates the battery is fully charged and the charger is in maintenance (float) mode.

Изображение: Подробно view of the charger unit, highlighting the LED indicators for 'CHARGING' (red) and 'STORAGE' (green), along with input/output specifications.

Настройка

1. Identify Battery Voltage: Determine if your battery is 6V or 12V. The charger automatically detects the voltage once connected.
2. Choose Connector: Select either the battery clamp connector or the ring terminal connector based on your battery's terminals.
3. Свържете се с батерията:
   • Свържете ЧЕРВЕНО positive (+) connector to the positive (+) battery terminal.
   • Свържете ЧЕРЕН negative (-) connector to the negative (-) battery terminal.

   Ensure a secure connection. Avoid touching the positive and negative connectors together.

4. Свържете се към променливотоково захранване: Plug the charger's AC power cord into a standard 100-240V AC electrical outlet.

Image: The charger unit shown connected to an ATV battery using the battery clamp connectors, illustrating a typical setup scenario.

Инструкция за работа

The CJ TECH charger operates automatically once connected to a battery and power source.

1. Автоматичен Voltage Откриване: The charger will automatically detect if the connected battery is 6V or 12V. It requires an activation voltage of 4V for 6V batteries and 8V for 12V batteries to begin charging.
2. Режим на зареждане: When the battery is charging, the ЧЕРВЕН LED will illuminate. The charger delivers a constant current of 0.75A ±0.1A during this phase.
3. Maintenance (Float) Mode: Once the battery reaches full charge, the charger automatically switches to maintenance mode, and the ЗЕЛЕН LED will illuminate. In this mode, the charger provides a small, continuous current to keep the battery at optimal charge without overcharging, preventing sulfation and extending battery life.
4. Прекъсване на връзката: To disconnect the charger, first unplug it from the AC power outlet, then disconnect the negative (-) battery connector, followed by the positive (+) battery connector.

Image: An illustration showing the charger's connection diagram to a battery and AC power, alongside a table detailing input voltagд, обем изходtage, charging current, battery types, activation voltage, and housing protection.

Поддръжка

Proper maintenance ensures the longevity and reliable operation of your charger and batteries.

• Почистване: Keep the charger unit clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• Проверка на кабела: Regularly inspect the power cord and battery connectors for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
• Съхранение: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure cables are neatly coiled to prevent damage.
• Грижа за батерията: For optimal battery life, ensure battery terminals are clean and free of corrosion before connecting the charger.

Отстраняване на неизправности

Ако срещнете проблеми със зарядното си устройство, вижте следните често срещани проблеми и решения:

Спецификации

• Номер на модела: 25305-EV
• Входен обемtage: AC 100-240V, 50/60Hz
• Изход Voltage: 6V DC / 12V DC (Automatic Detection)
• Ток на зареждане: 0.75A ± 0.1A
• Видове батерии: 6V/12V Lead-Acid Batteries (AGM, GEL)
• Activation Voltage: 4V for 6V batteries, 8V for 12V batteries
• Защита на корпуса: IP64 водоустойчив
• Размери на продукта: 3 x 3 x 5 инча
• Тегло на артикула: 9.9 унции
• Сертификати: CETL / CE-EMC / CE-LVD / ROHS

Гаранция и поддръжка

For warranty information or technical support, please refer to the documentation included with your purchase or contact CJ TECH customer service. Keep your proof of purchase for warranty claims.