Наръчници+

STAPLES Hyken Pro

STAPLES Hyken Pro Ergonomic Office Chair

Ръководство за употреба

1. Продуктът свършиview

The STAPLES Hyken Pro Ergonomic Office Chair is designed to provide comfort and support for extended periods of sitting. It features a breathable mesh back and seat, adjustable lumbar support, a three-position tilt lock, and a swivel base for enhanced mobility. This chair is built to meet or exceed ANSI/BIFMA quality standards and supports individuals up to 275 lbs.

STAPLES Hyken Pro Ergonomic Office Chair, front view

Фигура 1: Отпред view of the STAPLES Hyken Pro Ergonomic Office Chair.

2. Информация за безопасност

This chair meets or exceeds ANSI/BIFMA safety standards. To ensure safe operation and prevent injury:

  • Always ensure the chair is properly assembled before use.
  • Не превишавайте препоръчителното максимално тегло за 275 фунта.
  • Избягвайте да стоите на стола или да го използвате като стъпало.
  • Дръжте деца и домашни любимци далеч от стола по време на сглобяване и регулиране.
  • Regularly inspect all components for wear or damage. Discontinue use if any damage is found.

3. Настройка и монтаж

While some components may be pre-assembled, final assembly is required. Please follow these general steps. Refer to the detailed assembly instructions included in your product packaging for specific diagrams and hardware.

  1. Разопаковайте компоненти: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts are present against the included parts list.
  2. Прикрепете колелцата към основата: Insert the casters into the holes at the end of each leg of the 5-star base until they click securely into place.
  3. Монтирайте газов асансьор: Place the gas lift cylinder into the center hole of the 5-star base.
  4. Сглобяване на седалката и облегалката: Attach the seat mechanism to the bottom of the seat cushion. Then, connect the backrest to the seat mechanism using the provided screws and tools.
  5. Прикрепете подлакътници: Secure the armrests to the seat assembly. Ensure they are firmly attached.
  6. Монтаж на облегалката за глава: Attach the adjustable headrest to the top of the backrest.
  7. Окончателно сглобяване: Place the assembled seat and backrest onto the gas lift cylinder. Press down firmly to secure.
Diagram showing dimensions of the STAPLES Hyken Pro Ergonomic Office Chair

Figure 2: Chair dimensions for reference during assembly and placement.

4. Инструкции за работа

The Hyken Pro chair offers multiple adjustment options to customize your seating experience:

  • Регулиране на височината на седалката: Locate the lever under the right side of the seat. Pull the lever up to raise the seat. While seated, pull the lever up to lower the seat. Release the lever to lock the height.
  • Регулиране на подлакътника: The armrests are 3-way adjustable. Press the button on the side of the armrest support to adjust their height. They can also pivot and slide forward/backward.
  • Tilt Lock and Tension:
    • Заключване на наклона: Use the lever on the left side of the seat to lock the backrest in one of three reclining positions.
    • Напрежение при накланяне: Rotate the knob located under the front of the seat to adjust the resistance of the recline function. Turn clockwise for more resistance, counter-clockwise for less.
  • Регулиране на лумбалната опора: The integrated lumbar support can be adjusted vertically to fit the curve of your lower back. Gently push or pull the lumbar support pad to your desired position.
  • Регулиране на облегалката за глава: The 3-way pivoting headrest can be adjusted for height and angle to provide optimal neck and head support.
Diagram illustrating 14 adjustment options of the STAPLES Hyken Pro chair

Фигура 3: Надview of the chair's 14 adjustment options for a customized fit.

5. Поддръжка и грижа

Proper maintenance will extend the life and appearance of your STAPLES Hyken Pro chair:

  • Cleaning Mesh Fabric: Използвайте мека кърпа dampened with mild soap and water to gently wipe down the mesh back and seat. Avoid abrasive cleaners or harsh chemicals. Allow to air dry completely.
  • Почистване на пластмасови и метални части: Избършете с мека, damp cloth. For stubborn dirt, a mild, non-abrasive cleaner can be used.
  • Грижа за колелцата: Periodically check casters for accumulated hair or debris and clean as needed to ensure smooth movement.
  • Проверка на хардуера: Every six months, check all screws and bolts to ensure they are tight. Re-tighten if necessary.
  • Избягвайте пряка слънчева светлина: Prolonged exposure to direct sunlight can cause the mesh and plastic components to fade or degrade.

6. Отстраняване на проблеми

Ако срещнете проблеми със стола си, вижте следните често срещани решения:

проблемВъзможна причинаРешение
Chair does not raise or lowerНеизправност на газовия асансьор или неактивиран лост.Уверете се, че лостът за регулиране на височината е напълно задействан. Ако проблемът продължава, може да се наложи смяна на газовия асансьор.
Chair squeaks or wobblesLoose hardware or worn components.Check and tighten all screws and bolts. Apply a small amount of silicone lubricant to moving parts if squeaking continues.
Колелцата не се търкалят гладкоОтломки, заседнали в колелцата, или износени колелца.Remove any hair or debris from the caster wheels. If casters are worn, they may need replacement.
Облегалката не се накланя и не се заключваTilt lock mechanism not engaged or tilt tension too high.Ensure the tilt lock lever is correctly positioned. Adjust the tilt tension knob counter-clockwise to reduce resistance.

7. Спецификации

  • Име на модела: Hyken Pro
  • Номер на модела на артикул: ST63228
  • марка: СКЛАПКИ
  • цвят: черен
  • материал: Mesh (Fabric Type), Foam (Fill Material)
  • Размери на продукта: 44" - 56.3" H x 28.5" W x 27.8" D (Overall)
  • Дълбочина на седалката: 17.9 инча
  • Обратно Стил: Мрежа
  • Специална функция: Регулируема облегалка за глава
  • Препоръка за максимално тегло: 275 паунда
  • Брой легнали позиции: 3
  • Тегло на артикула: 27.2 паунда
  • Стандарти за безопасност: Meets or exceeds ANSI/BIFMA quality standards
Image showing the STAPLES Hyken Pro chair with a 275 lbs weight capacity icon

Figure 4: The chair is designed to support users up to 275 lbs.

8. Гаранция и поддръжка

For information regarding warranty coverage, returns, or customer support, please refer to the following:

  • Връща: This product typically includes a 30-day easy return policy. Please check your purchase documentation for specific details.
  • Поддръжка на клиенти: For assistance with your STAPLES Hyken Pro chair, please contact STAPLES customer service. Contact information can usually be found on the STAPLES official webсайта или вашата касова бележка за покупка.
  • Планове за защита: Optional 2-Year or 3-Year Protection Plans may be available for purchase separately.

For further details, visit the STAPLES Store on Amazon.