Molift, an Etac brand, specializes in ergonomic patient hoists, slings, and transfer assistive devices designed to ensure safe and comfortable lifting for caregivers and users.
Молифт is a globally recognized brand within the Etac Group, dedicated to developing innovative patient handling solutions. The Molift product line includes mobile hoists, ceiling lifts, sit-to-stand aids, and a diverse range of slings, all engineered to facilitate safe and dignified transfers in hospitals, care facilities, and home settings.
Renowned for their ergonomic design and reliability, Molift devices aim to reduce physical strain on caregivers while ensuring the comfort and security of patients. As part of Etac, Molift products comply with rigorous safety standards (such as ISO 10535) and are designed to improve the quality of life for individuals with mobility challenges.
Най-новите ръководства от manuals+ курирано за тази марка.
Често задавани въпроси относно ръководства, регистрация и поддръжка за тази марка.
Use the designated battery charger (e.g., for Li-NMC 25.2V batteries) and connect it to a power source (120-240 V AC). Place the battery in the charger and refer to the LED indicators to confirm charging status.
The service LED typically lights up when the device requires a periodic inspection or maintenance, often after 12 months or a specific number of lift cycles. Contact your distributor for service when this light appears.
Etac recommends using designated Molift slings for optimal safety. However, the hoists may be compatible with other slings if stated in the compatibility guidelines found on the Etac website. Always perform a risk assessment before mixing brands.
Clean surfaces regularly with a damp cloth using a pH-neutral detergent. Certain products can be disinfected with approved solutions (e.g., 70% disinfection solution). Avoid solvents or strong acids that may damage the material.
The serial number is located on the product label, typically found on the chassis or lifting column. It is usually listed alongside the EAN code and production date (YYYY-MM-DD).