IWP BT-3400 3D Hologram Fan User Manual

Важна информация за безопасност

Моля, обърнете внимание:

The fan operates at high speed and generates strong airflow. To prevent damage or injury, ensure that nothing is close to the fan blades when the device is in operation.

If possible, install the device in a high location or protect it with appropriate frames or enclosures.

Продуктът е свършилview

The IWP BT-3400 is a 3D Hologram Fan designed for advertising and display purposes. It utilizes 224 professional HD LED beads to project vivid, borderless 3D images and videos, creating a compelling visual effect of content floating in the air.

Инструкции за настройка

1. Разопаковане и проверка

Внимателно разопаковайте всички компоненти и се уверете, че са налични следните елементи:

• Хост на устройството
• Fan Blades (2 for old version, pre-assembled for upgrade version)
• Small Screws (for old version assembly)
• Отвертка
• Четец на TF карти
• Захранващ адаптер (щепсел за САЩ)
• EU Plug Conversion Adapter

Inspect all components for any signs of damage. If any parts are missing or damaged, please contact customer support.

2. Assembly (Old Version Only)

If you have the 'Old Version' of the 3D Hologram Fan, follow these steps to assemble the fan blades:

1. Locate the Device Host and the two Fan Blades.
2. Align each fan blade with the slots on the Device Host. Ensure the side with the LED beads is facing upwards.
3. Securely fix each blade to the Device Host using the provided small screws and screwdriver. Ensure the screws are tightened firmly to prevent vibration during operation.

3. Upgrade Version (Pre-assembled)

The 'Upgrade Version' comes pre-assembled, eliminating the need for manual blade attachment. Simply remove it from the packaging.

4. Захранване

1. Свържете захранващия адаптер към устройството.
2. Plug the power adapter into a suitable 100-240V AC power outlet. Use the EU plug conversion adapter if required for your region.

Инструкция за работа

1. Включване / изключване на захранването

Once connected to power, the device will typically start automatically. To power off, disconnect the power adapter.

2. Управление на съдържанието

The 3D Hologram Fan supports custom video, animation, and image displays. Content can be loaded via a memory card.

• The memory card comes with graphic editing software compatible with Windows 7 and Windows 10 operating systems.
• Use this software to prepare your desired 3D content.
• Insert the memory card into the designated slot on the device.

3. Контрол на мобилно приложение

The device supports wireless control via a mobile application named '3D Circle'.

• Download the '3D Circle' app from your device's app store (compatible with iOS and Android systems).
• Connect your mobile device to the fan via Wi-Fi.
• The app allows for custom video and image editing, adjusting display angle, and brightness.

4. Visual Demonstration

Watch this video to see the 3D Hologram Fan in action:

Поддръжка

1. Почистване

To maintain optimal performance and visual clarity, regularly clean the fan blades and LED beads with a soft, dry cloth. Do not use liquid cleaners directly on the device.

2. Съхранение

When not in use for extended periods, store the 3D Hologram Fan in its original packaging or a protective case in a cool, dry place.

3. Употреба на открито

If using the device outdoors, ensure adequate waterproof measures are in place to protect it from moisture and environmental elements. The device is primarily designed for indoor use unless properly protected.

Отстраняване на неизправности

If you encounter issues with your 3D Hologram Fan, refer to the following common problems and solutions:

• No Power/Fan Not Spinning: Ensure the power adapter is securely connected to both the device and a working power outlet. Check if the power outlet is functional.
• Без дисплей с изображения: Verify that the memory card is correctly inserted and contains compatible content. Ensure the fan blades are properly assembled and secured (for old version).
• Проблеми с връзката с приложението: Make sure Wi-Fi is enabled on your mobile device and you are connected to the fan's Wi-Fi network. Restart both the fan and the app if necessary.
• Проблеми с качеството на изображението: Ensure the content resolution is appropriate for the device (2000x224). Check for any obstructions around the fan blades.

За постоянни проблеми, моля, свържете се с отдела за обслужване на клиенти.

Спецификации

Гаранция и поддръжка

For any technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact the seller or manufacturer directly. Specific warranty details may vary; please refer to your purchase documentation for more information.

Съвети за потребителя

• Персонализирано съдържание: The device supports custom video and image editing. Use the provided software (compatible with Windows 7/10) to create and upload your own 3D content to the memory card. This allows for dynamic and personalized displays beyond pre-loaded images.
• Приложение за контрол: The '3D Circle' mobile app (available for iOS and Android) is essential for full control over the device, including content management, brightness adjustments, and display angle. Ensure your phone is connected to the fan's Wi-Fi for seamless operation.
• Възпроизвеждане на видео: While primarily for advertising, the fan can display common video formats. You can use it to play short, engaging video clips to enhance your holographic presentations.