1. Въведение
The JBL GT5-10D is a 10-inch dual-voice-coil subwoofer designed for car audio systems. It features a vented motor structure and is engineered to deliver robust bass performance. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer.
Фигура 1: Отпред view of the JBL GT5-10D Subwoofer.
Основните характеристики включват:
- 10-inch Dual 4 Ohm GT5 Series Subwoofer
- Peak Power Handling: 1100 watts
- RMS Power Handling: 275 watts
- Recommended power range: 150 - 275 watts RMS
- Polypropylene woofer cone material
- Rubber-coated tinsel leads for enhanced durability
- Proprietary steel frame
2. Настройка и инсталация
Proper installation is crucial for optimal performance and longevity of your JBL GT5-10D subwoofer. It is recommended that installation be performed by a qualified car audio professional.
2.1 Изисквания към корпуса
The subwoofer is designed to operate within a suitable enclosure. Consult the specifications section for recommended enclosure volumes and types. Ensure the enclosure is robust and sealed properly to prevent air leaks, which can degrade sound quality.
Figure 2: Subwoofer dimensions for enclosure planning. The subwoofer measures 12"D x 12"W x 10"H.
2.2 Wiring the Dual Voice Coils
The GT5-10D features dual 4-ohm voice coils, allowing for flexible wiring configurations to match your ampИзисквания за импеданс на изпарителя. Често срещани конфигурации включват:
- Паралелно окабеляване: Connect both voice coils in parallel for a 2-ohm load. This configuration typically draws more power from the ampлифир.
- Серия окабеляване: Connect both voice coils in series for an 8-ohm load. This configuration draws less power and is suitable for amplifiers that are not 2-ohm stable.
Винаги се обръщайте към вашия amplifier's manual for compatible impedance loads and wiring diagrams. Incorrect wiring can damage both the subwoofer and the ampлифир.
Фигура 3: Страна view of the subwoofer, illustrating the terminal connections for wiring.
2.3 Захранване
Свържете субуфера към подходящ amplifier using high-quality speaker wire. Ensure proper polarity (+ to + and - to -) to avoid phase issues that can negatively impact sound quality. The subwoofer is designed for wired connectivity, typically via RCA inputs from your head unit to the amplifier, and then speaker wire from the amplifier към субуфера.
3. Инструкции за работа
Once installed and wired correctly, the JBL GT5-10D subwoofer will enhance your car audio system's bass response. The primary control for the subwoofer will be through your car's head unit or external amplifier контроли.
3.1 Initial Power-Up and Adjustment
- Ensure all connections are secure before powering on your audio system.
- Започнете с amplifier's gain control set to its minimum (lowest) setting.
- Play a piece of music with a good bass range.
- Бавно увеличете ampусилването на преобразувателя, докато се постигне желаното ниво на баса без изкривяване.
- Регулирайте нискочестотния филтър (LPF) на вашето ampвисокоговорител или главно устройство, за да смесите безпроблемно изхода на събуфера с основните високоговорители. Обичайна начална точка е около 80-100 Hz.
- If your system includes a phase control, experiment with 0° and 180° settings to find the one that provides the most impactful and coherent bass.
While the product specifications mention "Touch" as a control method, for a passive subwoofer like the GT5-10D, this typically refers to controls on the connected amplifier or head unit, not directly on the subwoofer itself.
4. Поддръжка
The JBL GT5-10D subwoofer is built for durability, but proper care will ensure its long-term performance.
- Почистване: Използвайте мека, суха кърпа, за да избършете конуса и обкова на събуфера. Избягвайте използването на агресивни химикали или прекомерна влага.
- Инспекция: Periodically check the speaker terminals and wiring for any signs of corrosion or loose connections. Ensure the rubber-coated tinsel leads are intact, as they protect against wear.
- Фактори на околната среда: While designed for car environments, extreme temperatures and direct sunlight can affect performance over time. Ensure adequate ventilation around the subwoofer.
5. Отстраняване на проблеми
If you experience issues with your JBL GT5-10D subwoofer, refer to the following common problems and solutions:
| проблем | Възможна причина | Решение |
|---|---|---|
| Няма звук от субуфера |
|
|
| Distorted or "Muddy" Bass |
|
|
| Weak or Lackluster Bass |
|
|
Ако проблемите продължават, консултирайте се с професионален техник по автомобилно аудио.
6. Спецификации
| Характеристика | детайл |
|---|---|
| Име на модела | GT5-10D |
| Тип високоговорител | Субуфер |
| Диаметър на субуфера | 10 инча |
| Максимална изходна мощност на високоговорителя | 1100 вата (пикова) |
| RMS захранване | 275 вата |
| Импеданс | Dual 4 Ohms (can be wired to 2 or 8 ohms) |
| Материал на конуса за високоговорител | Полипропилен |
| Размери на продукта | 12" Д x 12" Ш x 10" В |
| Тегло на артикула | 13.2 паунда |
| Технология за свързване | Wired (RCA or 3.5mm audio jack to ampлифтинг) |
| производител | Харман Кардон |
| Номер на модела на артикул | GT5-10D |
| UPC | 050036931007 |
7. Understanding Your Subwoofer (Video)
This video provides additional insights into the design and technology behind JBL and Infinity speakers, including concepts relevant to your subwoofer's performance, such as materials and cone design.
Video 1: JBL & Infinity Speakers and Subwoofers: Bigger Bass. This video explains the importance of speaker materials and cone design for improved bass response and durability.
8. Гаранция и поддръжка
The JBL GT5-10D subwoofer comes with a standard manufacturer's warranty. Please refer to the warranty documentation included with your product for specific terms, conditions, and registration information. For technical support or service inquiries, please contact JBL customer service or visit the official JBL webсайт.
Manufacturer: Harman Kardon
