1. Въведение
The DAC MP-199 Height-adjustable Articulating Monitor Arm is designed to enhance your workspace by providing flexible positioning for your flat panel display. This robust arm is constructed from durable steel and metal, ensuring long-term reliability. It supports screens ranging from 13 inches to 27 inches and weighing up to 20 pounds. The arm features three pivot points, allowing for extensive adjustability including extension, tilt, swivel, and rotation.
Основните характеристики включват:
- Capable of 360-degree rotation and +/- 15-degree tilt.
- Articulating arms extend up to 16.25 inches (41.3 cm) with a post height of 16 inches (41 cm).
- Arms can be locked securely for touch screen applications.
- Integrated cable clips for effective cable management.
- Convenient storage slot for the included Allen key in the base cover.
2. Информация за безопасност
Please read all safety instructions carefully before installation and use. Failure to do so may result in property damage or personal injury.
- Капацитет на теглото: Не превишавайте максималния товароносимост на 20 фунта (9.07 кг). Overloading can cause instability and potential failure.
- Размер на екрана: This arm is designed for flat panel displays between 13 инча и 27 инча.
- Worksurface Thickness: Ensure your worksurface is between 0.5 inches and 2 inches thick for secure C-clamp монтаж.
- Стабилност: Verify that the monitor arm is securely fastened to the desk and the monitor is properly attached to the VESA plate before use.
- Корекции: Make adjustments slowly and carefully. Ensure no cables are pinched during movement.
- деца: Keep children away from the monitor arm during installation and adjustment.
3. Съдържание на пакета
Please check that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- Main Pole with C-clamp База
- Articulating Monitor Arms (2 units)
- VESA монтажни плочи (2 броя)
- Щипки за кабели
- T-bar Allen Key
- Hardware Kit (screws, washers, etc. for monitor attachment)
4. Настройка
Follow these steps to set up your DAC MP-199 Monitor Arm:
- Прикрепете C-clamp to Worksurface:
Place the main pole with the C-clamp base on the edge of your worksurface. Tighten the C-clamp screw until the base is firmly secured. Ensure the worksurface thickness is between 0.5 and 2 inches.
Image: The DAC MP-199 dual monitor arm assembly, showing the central pole with the C-clamp base and two articulating arms with VESA mounting plates. This illustrates the complete setup before monitors are attached.
- Прикрепете шарнирни рамена:
Slide the articulating arms onto the main pole at your desired height. Use the integrated screws to secure them in place. You can adjust their vertical position later if needed.
- Attach VESA Mounting Plates to Monitors:
Remove the VESA mounting plates from the articulating arms (if pre-attached). Align the plate with the VESA mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws from the hardware kit to secure the plate to the monitor. Do not overtighten.
- Монтиране на монитори към рамената:
Carefully slide the monitor (with the attached VESA plate) onto the articulating arm's VESA head. Ensure it clicks securely into place. Tighten any locking screws on the VESA head to prevent accidental detachment.
Image: The DAC MP-199 dual monitor arm with two flat panel displays mounted. This demonstrates the arm's capability to support two monitors simultaneously, showcasing its full extension and positioning.
Image: The DAC MP-199 dual monitor arm with a single flat panel display mounted on one arm, while the other arm remains empty. This illustrates the flexibility of using one or both arms as needed.
5. Работещи
The DAC MP-199 monitor arm offers extensive adjustability for optimal viewкомфорт.
- Регулиране на височината: Loosen the screws on the articulating arms, slide them up or down the main pole to the desired height, and then re-tighten the screws.
- Удължаване/прибиране: Gently push or pull the articulating arms to extend or retract your monitor's distance from the pole. The arms can extend up to 16.25 inches.
- Регулиране на наклона: Tilt your monitor +/- 15 degrees up or down to reduce glare and find the best viewing angle. Use the Allen key to adjust the tilt tension if needed.
- Регулиране на въртене: Swivel your monitor left or right at the arm joints for collaborative viewing or to adjust your personal viewъгъл.
- Ротация (Портрет/Пейзаж): Rotate your monitor 360 degrees to switch between landscape and portrait orientations. This is particularly useful for documents or coding.
- Touch Screen Locking: For touch screen applications, the arms can be locked tight to prevent movement during interaction. Refer to the arm joints for specific locking mechanisms, typically involving tightening a screw with the Allen key.
- Управление на кабели: Utilize the integrated cable clips along the main pole and arms to route and organize your monitor and power cables, keeping your workspace tidy.
6. Поддръжка
Редовната поддръжка гарантира дълготрайността и оптималната работа на рамото на вашия монитор.
- Почистване: Wipe the arm surfaces with a soft, damp кърпа. Избягвайте абразивни почистващи препарати или разтворители, които биха могли да повредят покритието.
- Проверете връзките: Periodically check all screws and bolts, especially those securing the C-clamp to the desk and the VESA plate to the monitor, to ensure they remain tight.
- Смазване: The articulating joints are designed for smooth movement and generally do not require lubrication. If movement becomes stiff, ensure no debris is obstructing the joints.
- Allen Key Storage: Always return the T-bar Allen key to its designated storage slot in the base cover for easy access.
7. Отстраняване на проблеми
If you encounter issues with your DAC MP-199 monitor arm, refer to the following common problems and solutions:
- Arm is sagging or not holding position:
- Ensure the monitor weight does not exceed the 20 lb capacity.
- Tighten the tension screws at the arm joints using the provided Allen key.
- Monitor is wobbling:
- Проверете дали C-clamp е здраво закрепен към бюрото.
- Verify that the VESA plate is firmly attached to both the monitor and the arm.
- Difficulty in adjusting arm movement:
- Loosen the tension screws slightly at the joints if movement is too stiff.
- Ensure no cables are caught in the joints.
- Кабелите не се закрепват в скобите:
- Ensure cables are properly routed and not overfilled in the clips.
- Use additional cable ties if necessary for very thick cable bundles.
8. Спецификации
| Характеристика | Спецификация |
|---|---|
| Номер на модела | MP-199 |
| Марка | DAC |
| Тип материал | Легирана стомана |
| Цвят | Сив |
| Screen Size Support | 13" до 27" |
| Капацитет на теглото | До 9.07 кг на рамо |
| Удължаване на ръката | Up to 16.25" (41.3 cm) |
| Височина на стълба | 16" (41 см) |
| Обхват на накланяне | +/- 15 градуса |
| Въртене | 360 degrees (portrait to landscape) |
| Worksurface Thickness | 0.5" to 2" (for C-clamp) |
| VESA съвместимост | 75х75 мм, 100х100 мм |
9. Гаранция и поддръжка
For specific warranty information regarding your DAC MP-199 Mounting Arm, please refer to the documentation included with your purchase or visit the official DAC product support webсайт. Гаранционните условия обикновено покриват производствени дефекти за определен период от датата на покупка.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact DAC customer support through their official channels. Have your model number (MP-199) and purchase details ready when contacting support.
