Наръчници+

VEMER VP888200

VEMER Logik Micro DW Digital Timer Switch VP888200 User Manual

Модел: VP888200

1. Въведение

The VEMER Logik Micro DW VP888200 is a compact digital daily and weekly timer switch designed for precise management of electrical loads. This device features a modular 1 DIN unit design, an LCD display, and supports up to 20 ON/OFF or impulse programs with a 1-minute resolution. It is ideal for automating various electrical circuits in residential or commercial settings.

2. Информация за безопасност

Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

3. Продуктът свършиview

The VEMER Logik Micro DW is a compact digital timer switch designed for DIN rail mounting. It features a clear LCD display for programming and status indication.

3.1. Physical Dimensions and Wiring Diagram

The following image illustrates the front and side dimensions of the Logik Micro DW, along with its electrical wiring diagram.

VEMER Logik Micro DW VP888200 Front, Side View и схема на свързване

Описание на изображението: This image displays three views of the VEMER Logik Micro DW VP888200. On the left, the "Vista frontale" (Front view) shows the device's height as 88mm and width as 18mm. In the center, the "Vista laterale" (Side view) indicates a depth of 60mm and a DIN rail clip height of 45mm. On the right, the "Schema" (Wiring Diagram) illustrates the electrical connections: L (Line) and N (Neutral) inputs, and the relay contacts labeled 1, 2, 3, 4, 5, 6. The diagram shows the internal relay switching between contacts for load control.

  • Отпред View: Height 88mm, Width 18mm.
  • отстрани View: Depth 60mm, DIN rail clip height 45mm.
  • Електрическа схема:
    • L (Line) and N (Neutral): Вход за захранване.
    • Релейни контакти: The device features a single changeover relay (1 NO/NC contact). Connect the load according to the desired switching configuration.

4. Настройка

4.1. Монтаж

  1. Изключване на захранването: Ensure the main power supply to the electrical panel is disconnected before beginning installation.
  2. Монтаж: Mount the Logik Micro DW onto a standard 35mm DIN rail. The device occupies 1 DIN module.
  3. Окабеляване: Refer to the wiring diagram in Section 3.1.
    • Connect the Line (L) and Neutral (N) power supply wires to the designated terminals.
    • Connect the electrical load to the relay output terminals. The device has one changeover contact.
  4. Сигурни връзки: Ensure all wire connections are secure and properly tightened.
  5. Възстановяване на мощността: Once installation is complete and verified, restore power to the electrical panel.

4.2. Initial Power-Up and Time Setting

При първоначално включване или след продължително прекъсване на захранванетоtage, the display may show default settings or require time synchronization.

  1. Активиране на дисплея: The LCD display will activate. If it's blank, ensure power is supplied correctly.
  2. Задайте текущия час и ден: Use the device's buttons (refer to the specific button layout on the device, not detailed in provided data) to set the current time and day of the week. This is crucial for accurate program execution.

5. Инструкции за работа

The Logik Micro DW allows for daily and weekly programming of electrical loads.

5.1. Режими на програмиране

  • Дневно програмиране: Programs repeat every day at the same set time.
  • Седмично програмиране: Programs can be set for specific days of the week or groups of days.

5.2. Setting ON/OFF Programs

The device supports up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.

  1. Влезте в режим на програмиране: Press the designated button (e.g., "PROG" or "SET") to enter the programming menu.
  2. Select Program Number: Choose an available program slot (e.g., P1, P2, ..., P20).
  3. Задаване на време за включване: Input the desired time for the load to switch ON.
  4. Задаване на време за изключване: Input the desired time for the load to switch OFF.
  5. Изберете дни: Choose the days of the week for the program to be active (e.g., Mon-Fri, Sat-Sun, or specific days).
  6. Save Program: Confirm and save the program. Repeat for additional programs.

The programming resolution is 1 minute, allowing for precise control.

5.3. Impulse Programming

The device also supports impulse programming, where the relay briefly activates for a set duration.

  1. Влезте в режим на програмиране: Влезте в менюто за програмиране.
  2. Select Impulse Program: Choose an impulse program slot.
  3. Set Impulse Time: Define the time when the impulse should occur.
  4. Set Impulse Duration: Specify how long the relay should remain active (e.g., 1-59 seconds).
  5. Изберете дни: Choose the days for the impulse program.
  6. Save Program: Потвърдете и запазете.

5.4. Ръчно заместване

The device typically includes a manual override function to temporarily switch the load ON or OFF independently of the programmed schedule. Consult the device's physical buttons or display menu for this function.

6. Поддръжка

6.1. Почистване

To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray liquids directly onto the device.

6.2. Battery Reserve

The Logik Micro DW features a rechargeable lithium battery that provides a power reserve of approximately 3 years. This reserve maintains the time and programmed settings during power outages. The relay will only switch in the presence of mains power.

  • Батерията е вътрешна и не може да се сменя от потребителя.
  • Regular operation with mains power will keep the battery charged.

7. Отстраняване на проблеми

проблемВъзможна причинаРешение
Дисплеят е празен.Няма захранване към устройството.Check the main circuit breaker and wiring connections (L and N terminals).
Programs are not executing.Incorrect time/day setting; Programs not saved; Manual override active; Power outage.Verify current time and day. Re-enter and save programs. Check manual override status. Ensure continuous power supply.
Товарът не се включва/изключва.Incorrect wiring of the load; Exceeded load capacity; Faulty load.Verify load wiring according to the diagram. Ensure load current does not exceed 16A. Test the load independently.
Time drifts or resets frequently.Low internal battery reserve.Ensure the device is continuously powered for several hours to allow the internal battery to recharge. If the issue persists after prolonged charging, the device may require service.

8. Спецификации

Характеристикадетайл
МоделVP888200
Захранване230 V AC ± 10% (50/60 Hz)
Изход1 changeover relay (1 NO/NC contact)
Оценка на контактите16 A at 250 V AC (cos(Φ)=1)
Брой програми20 ON/OFF програми
Програмна резолюция1 минута
Захранващ резерв3 years (rechargeable lithium battery)
Работна температура-10 °C to +50 °C
Температура на съхранение-10 °C to +60 °C
Степен на защитаIP40
ДисплейLCD (no backlight)
МонтажDIN rail (1 module)
Размери (В x Ш x Д)88 мм x 18 мм x 60 мм (приблизително, базирано на диаграма)

9. Гаранция и поддръжка

VEMER products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official VEMER webсайт.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact VEMER customer support through their official channels. Ensure you have your product model number (VP888200) and purchase details available when contacting support.

Official VEMER Webсайт: www.vemer.it

Свързани документи - VP888200

предварителноview Vemer duo BT VE799900: Bluetooth Time Switch User Manual
Comprehensive user manual for the Vemer duo BT VE799900, detailing installation, configuration, operation, and troubleshooting of this Bluetooth-enabled astronomical time switch with two independent relays.
предварителноview Vemer PC RF8 Radiofrequency Loads Control User Manual
User manual for the Vemer PC RF8 Radiofrequency Loads Control unit and RX.16A actuators. Provides installation, operation, and configuration instructions to prevent electrical blackouts due to overload.
предварителноview Технически данни за цифровия хронотермостат Vemer MKCT032-2013
Подробен технически информационен лист за седмичния цифров хронотермостат за вграждане Vemer MKCT032-2013, в който са описани неговите характеристики, спецификации и работни параметри за прецизен контрол на температурата и енергийна ефективност.
предварителноview Vemer ThermoPro Chronothermostat for Radiators User Manual
Comprehensive user manual for the Vemer ThermoPro weekly chronothermostat for radiators, covering installation, operation, programming, and advanced functions to optimize heating control.
предварителноview Vemer ThermoPro Programmable Radiator Thermostat User Manual
User manual for the Vemer ThermoPro programmable radiator thermostat (model VE740700). Learn about installation, programming, functions, and safety features for efficient home heating control.
предварителноview Ръководство за потребителя на цифров програмируем термостат Vemer Dafne
Подробно ръководство за потребителя на цифровия програмируем термостат Vemer Dafne, обхващащо монтаж, програмиране, работа, безопасност и технически спецификации за ефективен контрол на климата в дома.