Onset MX1101

Ръководство за потребителя на Onset HOBO MX1101 регистратор на данни за температура/относителна влажност

Модел: MX1101

1. Въведение

The Onset HOBO MX1101 is a wireless data logger designed to measure and transmit temperature and relative humidity data. Utilizing Bluetooth Low Energy (BLE) technology, it allows for convenient data access and configuration via mobile devices running the HOBOmobile app. This manual provides essential information for the proper setup, operation, and maintenance of your MX1101 data logger.

2. Информация за безопасност

  • Do not expose the data logger to extreme temperatures outside its specified operating range.
  • Avoid exposing the device to water or other liquids beyond its IP50 rating, which indicates protection against dust but not water immersion.
  • Use only the specified AAA 1.5 V alkaline batteries. Incorrect battery types may damage the device.
  • Изхвърлете батериите в съответствие с местните разпоредби.
  • Не се опитвайте сами да отваряте или поправяте устройството. Обърнете се към квалифициран сервизен персонал.

3. Продуктът свършиview

The HOBO MX1101 is a compact, self-contained data logger featuring an integrated LCD screen for real-time data display and status indicators. It communicates wirelessly with your mobile device via Bluetooth for setup, data download, and management.

Onset HOBO MX1101 Temperature/Relative Humidity Data Logger

Фигура 1: Отпред view of the Onset HOBO MX1101 data logger, showing the LCD display and sensor area.

Ключови характеристики:

  • Безжична комуникация: Bluetooth Low Energy (BLE) for connection to mobile devices.
  • Integrated LCD: Displays current temperature, relative humidity, logging status, battery level, and memory usage.
  • HOBOmobile App: Free application for iOS and Android for logger configuration, data viewing, and management.
  • Известия за аларма: Configurable audible or visual alarms for user-defined thresholds.
  • Burst Logging: Allows for faster logging intervals when sensor readings exceed or fall below specified limits.
  • Голям капацитет на паметта: Stores up to 84,650 measurements.

4. Настройка

4.1 Инсталиране на батерията

  1. Намерете отделението за батерии на гърба на регистратора на данни.
  2. Отворете капака на отделението.
  3. Insert two AAA 1.5 V alkaline batteries, ensuring correct polarity.
  4. Затворете надеждно капака на отделението за батерии.

4.2 HOBOmobile App Installation

Download the free HOBOmobile app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices). Търсене на "HOBOmobile" by Onset.

4.3 Connecting to the Data Logger

  1. Уверете се, че Bluetooth е активиран на вашето мобилно устройство.
  2. Open the HOBOmobile app.
  3. The app will scan for nearby HOBO MX data loggers. Select your MX1101 from the list of discovered devices.
  4. Follow the on-screen prompts in the app to establish a connection.

4.4 Конфигуриране на Logger

Once connected, use the HOBOmobile app to configure the data logger settings, including:

  • Интервал на регистриране: Set how frequently data is recorded (e.g., 1 minute, 5 minutes).
  • Start/Stop Options: Define when logging begins and ends.
  • Прагове за аларма: Set high and low limits for temperature and humidity to trigger alarms.
  • Burst Logging Settings: Configure conditions for accelerated logging.
  • сигурност: Optionally set a password for logger access.

5. Работещи

5.1 Starting and Stopping Logging

Logging is initiated and stopped through the HOBOmobile app. Once configured and started, the logger will record data independently until stopped or its memory is full.

5.2 Viewing Data on the LCD

The built-in LCD screen provides immediate access to current readings and logger status. Information displayed typically includes:

  • Текуща температура
  • Текуща относителна влажност
  • Logging Status (e.g., RUN, STOP)
  • Индикатор за ниво на батерията
  • Memory Usage Indicator

Note: The LCD's visibility and response time may be affected by temperatures outside the 0 to 50°C (32 to 122°F) range.

5.3 Accessing Data via HOBOmobile App

Connect to the data logger using the HOBOmobile app to:

  • View real-time data and historical graphs.
  • Check the operational status and alarm notifications.
  • Download logged data to your mobile device.
  • Export data in various formats (e.g., CSV, Excel) for further analysis.
  • Споделяне на данни files via email or other applications.

6. Поддръжка

6.1 Смяна на батерията

When the battery indicator on the LCD or in the HOBOmobile app shows low power, replace the two AAA 1.5 V alkaline batteries as described in Section 4.1. Typical battery life is 1 year with a 1-minute logging interval.

6.2 Почистване

Wipe the exterior of the data logger with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the sensor openings.

6.3 Съображения за околната среда

The MX1101 has an IP50 environmental rating, meaning it is protected against dust ingress but not against water. Operate and store the device within its specified temperature and humidity ranges to ensure optimal performance and longevity.

7. Отстраняване на проблеми

  • Cannot connect to logger: Ensure Bluetooth is enabled on your mobile device and the logger is within the 100-foot wireless range. Check logger battery level.
  • Logger not recording data: Verify that logging has been started via the HOBOmobile app. Check memory usage; if full, download data and clear memory.
  • Неточни показания: Ensure the logger is placed in a location representative of the environment being monitored and not exposed to direct sunlight or drafts. Allow sufficient time for the logger to acclimate to new conditions.
  • LCD blank or slow: This is normal if the ambient temperature is outside the 0 to 50°C (32 to 122°F) range. The logger continues to function, but the display may be affected.
  • Кратък живот на батерията: Frequent connections, very short logging intervals, or continuous use of alarms can reduce battery life. Ensure fresh batteries are used.

For further assistance, refer to the HOBOmobile app's help section or the Onset webсайт.

8. Спецификации

Dimensions of Onset HOBO MX1101 Data Logger

Фигура 2: Dimensions of the Onset HOBO MX1101 data logger, showing a width of 3.34 inches and height of 1.44 inches.

ПараметърСтойност
Температурен диапазон-20 до 70°C (-4 до 158°F)
Точност на температурата±0.21°C from 0 to 50°C (±0.38°F from 32 to 122°F)
Диапазон на относителна влажност1% до 90% (без кондензация)
Точност на относителната влажност±2% from 20% to 80% typical (max ±4.5% including hysteresis at 25°C); ±6% typical below 20% and above 80%
памет128 KB (84,650 measurements maximum)
Живот на батерията1 year typical (with 1-minute logging interval)
Тип батерияTwo AAA 1.5 V alkaline batteries (user replaceable)
LCD Visibility0 до 50°C (32 до 122°F)
Размери3.66 x 8.48 x 2.29 см (1.44 x 3.34 x 0.9 инча)
Тегло56 грама (1.98 унции)
Екологичен рейтингIP50
СертификатиCE-Approved
Страна на произходСАЩ

9. Гаранция и поддръжка

The Onset HOBO MX1101 data logger comes with a manufacturer's warranty of 12 months from the date of purchase. For warranty claims, technical support, or service inquiries, please contact Onset customer support directly or visit their official website for detailed contact information and resources.

Свързани документи - MX1101

предварителноview Ръководство за потребителя на HOBO MX1101 регистратор на данни за температура/относителна влажност
Подробно ръководство за потребителя за HOBO MX1101 регистратор на данни за температура/относителна влажност, в което са описани подробно неговите функции, спецификации, настройка, работа и отстраняване на неизправности. Научете как да конфигурирате, внедрявате и четете данни от този регистратор с Bluetooth Smart за мониторинг на околната среда в помещенията.
предварителноview Ръководство за бърз старт на потопяем регистратор HOBO MX801
Кратко ръководство за употреба за потопяемия регистратор HOBO MX801, в което се описва подробно неговатаview, свързване на сензори, калибриране, конфигуриране, внедряване, изтегляне на данни и обработка.
предварителноview HOBO MX2300 Series Data Logger: Comprehensive User Manual and Specifications
Explore the HOBO MX2300 Series Data Loggers from Onset, designed for reliable temperature and relative humidity monitoring. This manual details setup, operation, specifications, and data management using the HOBOconnect app via Bluetooth Low Energy.
предварителноview Ръководство за потребителя на HOBOware - Софтуер за регистриране на данни за поява на заболяване
Подробно ръководство за потребителя за софтуера HOBOware от Onset, в което се описва подробно как да се стартират, отчитат, изобразяват и анализират данни от HOBO регистратори на данни и безжични HOBO възли. Обхваща функциите на HOBOware Pro и Lite, настройката, инструментите за анализ на данни и управлението на устройства за мониторинг на околната среда.
предварителноview Ръководство за потребителя на HOBO висящ температурен регистратор UA-001-xx
Подробно ръководство за потребителя за висящия температурен регистратор Onset HOBO (модели UA-001-08 и UA-001-64), в което са описани подробно спецификациите, свързването, настройката, работата, конфигурацията на алармата и смяната на батерията.
предварителноview Асистент за начална проводимост: Изчисляване на специфична проводимост с морска вода
Техническо ръководство, в което подробно са описани изчисленията, извършени от Onset Conductivity Assistant (версия 2.1) за определяне на специфичната проводимост и соленост в морска вода, включително ревизирани методи за нелинейна температурна компенсация и таблици с данни.