Ръководство за потребителя на LED табела за изход Philips Lighting ER55LD3WR

Въведение

This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.

Информация за безопасност

• Винаги изключвайте захранването, преди да инсталирате или обслужвате устройството.
• Монтажът трябва да се извърши от квалифициран електротехник в съответствие с националните и местните електрически норми.
• Не използвайте този продукт за цели, различни от предназначението му.
• Уверете се, че всички връзки са сигурни и правилно изолирани.
• Пазете от вода и прекомерна влага.

Съдържание на пакета

Преди да започнете монтажа, проверете дали всички компоненти са налични:

• Philips Lighting ER55LD3WR LED Exit Sign unit
• Монтажен хардуер (винтове, анкери)
• Ръководство за употреба (този документ)

Настройка и инсталиране

The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.

1. Подгответе зоната за инсталиране: Disconnect power to the circuit where the exit sign will be installed.
2. Монтаж:
   • Identify the desired wall mounting location.
   • Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
3. Окабеляване:
   • Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
   • Осигурете правилно заземяване.
   • Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
4. Окончателно сглобяване: Secure any covers or diffusers.

Фигура 1: Отпред view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.

Инструкция за работа

Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.

• Нормална работа: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
• Аварийна операция: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
• Бутон за тестване: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.

Фигура 2: Едър план view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.

Поддръжка

Regular maintenance ensures the reliability and longevity of your LED Exit Sign.

• Месечен тест: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
• Годишен тест: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
• Почистване: Почистете външността на модула с мека, damp плат. Не използвайте абразивни почистващи препарати или разтворители.
• Смяна на батерията: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.

Отстраняване на неизправности

Вижте следващата таблица за често срещани проблеми и техните решения.

Спецификации

Гаранция и поддръжка

For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.

производител: Philips осветление

Webсайт: Посетете магазина на PHILIPS в Amazon