Eurolite THA-250F LED Theater Spot

1. Въведение

This manual provides essential information for the safe and efficient operation of your Eurolite THA-250F LED Theater Spot. Please read this manual thoroughly before initial operation to ensure proper use and to prevent damage to the device or injury to yourself. Keep this manual for future reference.

The Eurolite THA-250F is a powerful 250W COB LED lighting fixture designed for indoor use, offering versatile dimming and focusing capabilities suitable for various theatrical and event lighting applications.

2. Инструкции за безопасност

ПРЕДУПРЕЖДЕНИЕ: Неспазването на тези инструкции за безопасност може да доведе до пожар, токов удар или други наранявания или щети.

• Това устройство е предназначено за само за вътрешна употреба. Do not expose it to rain or moisture.
• Уверете се, че захранването обtage съответства на рейтинга на устройството.
• Винаги свързвайте устройството към заземен електрически контакт.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Avoid direct eye exposure to the light source. The LED light is very bright.
• Осигурете адекватна вентилация около устройството. Не блокирайте вентилационните отвори.
• Mount the device securely using appropriate clampи предпазни кабели.
• Disconnect from mains power before cleaning or servicing.
• Дръжте запалими материали далеч от устройството.

3. Продуктът свършиview

Familiarize yourself with the components of your Eurolite THA-250F LED Theater Spot.

Фигура 3.1: Предна страна view of the Eurolite THA-250F LED Theater Spot, showing the lens and mounting bracket.

Фигура 3.2: Страна view of the unit, displaying the 'Eurolite LED THA-250F COB' branding.

Figure 3.3: Rear panel showing DMX IN/OUT, Power IN/OUT, and Fuse connections.

Figure 3.4: The included barndoors accessory, used to shape the light beam.

4. Настройка

4.1 Монтаж

The THA-250F is equipped with a robust mounting bracket for secure installation. Ensure the mounting surface or truss system can support the weight of the fixture (approximately 9.35 kg) and any additional accessories. Use appropriate clamps and always attach a safety cable to prevent accidental drops.

4.2 Захранване

Свържете предоставения захранващ кабел към ЗАХРАНВАНЕ socket on the rear panel (refer to Figure 3.3). Plug the other end into a suitable grounded power outlet. The unit supports power linking via the МОЩНОСТ socket for convenience, allowing multiple units to be powered from a single source (ensure total current draw does not exceed circuit limits).

4.3 DMX връзка

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN socket on the THA-250F (refer to Figure 3.3). To daisy-chain multiple units, connect a DMX cable from the DMX OUT socket of the first unit to the DMX IN socket of the next unit. Always terminate the last unit in a DMX chain with a 120 Ohm DMX terminator.

5. Инструкции за работа

5.1 Контролен панел

The control panel, located on the side of the unit, allows for configuration and manual control. It features a display screen, four buttons, and two rotary knobs.

Фигура 5.1: Подробно view of the control panel, showing MODE, ENTER, UP, DOWN buttons, and DIMMING, FOCUS knobs.

• Начин на употреба: Cycles through the main menu options.
• ВЪВЕДЕТЕ: Потвърждава избор или влиза в подменюта.
• НАГОРЕ НАДОЛУ: Навигира през опциите на менюто или настройва стойностите на параметрите.
• DIMMING Knob: Manually adjusts the light intensity.
• FOCUS Knob: Manually adjusts the beam focus.

Figure 5.2: The display screen indicating the current DMX address (ADDR:032) and channel mode (CH:03).

5.2 Режими на работа

The THA-250F can operate in several modes:

• DMX режим: Allows external control via a DMX controller. Set the DMX address and channel mode using the control panel.
• Ръчен режим: Control dimming and focus directly using the knobs on the control panel.
• Other modes (e.g., Standalone, Master/Slave) may be available. Refer to the on-screen menu for detailed options.

5.3 Основна операция

After powering on the unit, the display will show the current operating mode or DMX address. Use the MODE and ENTER buttons to navigate the menu. Use UP/DOWN to change values. The DIMMING and FOCUS knobs provide immediate manual control over light output and beam sharpness.

Figure 5.3: Two Eurolite THA-250F units in an operational setting, demonstrating their light output capabilities.

6. Поддръжка

6.1 Почистване

Regular cleaning helps maintain optimal performance and extends the lifespan of your device. Disconnect the unit from power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior of the unit.
• For the lens, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches.
• Periodically clean the ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.

6.2 Съхранение

When not in use, store the device in a dry, dust-free environment, away from extreme temperatures and humidity. If transporting, use appropriate protective cases.

7. Отстраняване на проблеми

If you encounter issues with your Eurolite THA-250F, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Eurolite customer support or a qualified technician.

8. Спецификации

9. Гаранция и поддръжка

This product is manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, spare parts, or service inquiries, please contact Eurolite customer service directly or visit their official webсайт.

Производител: Eurolite