Legrand 138074 Manual Call Point Instruction Manual

1. Продуктът свършиview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Фигура 1: Отпред view of the Legrand 138074 Manual Call Point.

2. Информация за безопасност

Моля, прочетете и разберете всички инструкции за безопасност, преди да инсталирате или използвате това устройство. Неспазването на тези инструкции може да доведе до имуществени щети, нараняване или смърт.

• Професионален монтаж: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Изключване на захранването: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• Voltage Проверка: Уверете се, че захранващият обtage matches the device's specifications.
• Условия на околната среда: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Цялостност на компонентите: Не използвайте устройството, ако някоя част е повредена.

3. Съдържание на пакета

При отваряне на опаковката проверете дали всички компоненти са налични и не са повредени:

• Legrand 138074 Manual Call Point (1 unit)
• Монтажни винтове (количество, както е доставено)
• Ръководство за употреба (този документ)

4. Настройка и инсталация

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Монтаж

1. Подгответе монтажната повърхност: Ensure the surface is clean, dry, and flat.
2. Маркирайте точките за пробиване: Use the call point's base as a template to mark the positions for mounting screws.
3. Пробийте отвори: Drill pilot holes appropriate for the mounting screws.
4. Осигурете базата: Attach the call point's base securely to the wall using the provided screws.

4.2. Окабеляване

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Уверете се, че всички връзки са сигурни и правилно изолирани.

Фигура 2: Вътрешна view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Окончателно сглобяване

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Инструкции за работа

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Активиране на алармата: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Проверка на активирането: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Евакуирам: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Поддръжка

Regular maintenance ensures the reliable operation of your manual call point.

• Визуална проверка: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Почистване: Clean the exterior of the call point with a soft, damp плат. Не използвайте абразивни почистващи препарати или разтворители.
• Функционално тестване: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Подмяна на компоненти: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Отстраняване на проблеми

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Спецификации

9. Гаранционна информация

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Поддръжка и контакт

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webсайт:

www.legrand.com

Когато се свързвате с поддръжката, моля, подгответе номера на модела на вашия продукт (138074) и всички съответни данни за покупката.