SATLINK WS-6916

SATLINK WS-6916 HD DVB-S DVB-S2 цифров сателитен търсач - ръководство за употреба

Модел: WS-6916

1. Въведение

This manual provides detailed instructions for the operation and maintenance of your SATLINK WS-6916 HD DVB-S DVB-S2 Digital Satellite Finder. This device is designed to assist in the precise installation and alignment of satellite dishes, ensuring optimal signal reception. Please read this manual thoroughly before using the device to ensure correct and safe operation.

2. Ключови характеристики

3. Съдържание на пакета

Моля, проверете дали всички изброени по-долу артикули са включени в пакета ви. Ако някои от артикулите липсват или са повредени, свържете се с вашия търговец на дребно.

4. Устройството е свършеноview

Familiarize yourself with the various components and ports of the SATLINK WS-6916.

Отпред view of SATLINK WS-6916 Digital Satellite Finder with main menu on screen

Фигура 4.1: Отпред View. This image displays the front of the SATLINK WS-6916, showing its 3.5-inch color display with the main menu interface, the numeric keypad, navigation buttons, and function keys (F1, F2, F3, SCAN, AV-S, MENU, EXIT, OK, INFO, MUTE, TTXT, SUBT, TV/R, AUDIO). Indicator lights for POWER, 22K, 13V/18V, LOCK, and CHARGE are also visible above the function keys.

отстрани view of SATLINK WS-6916 showing power switch, charging port, and USB port

Фигура 4.2: Страна View (Наляво). This image shows the left side of the device, featuring the power on/off switch, the DC charging input port, and a USB port for firmware updates and data transfer.

Назад view of SATLINK WS-6916 showing F-connector and speaker grille

Фигура 4.3: Гръб View. This image illustrates the rear of the SATLINK WS-6916, highlighting the F-connector for satellite signal input, the speaker grille for audio output, and the battery compartment.

5. Инструкции за настройка

5.1. Зареждане на батерията

Before initial use, fully charge the integrated 7.4V 3000 mAh battery.

  1. Connect the 220V charging adapter to the DC input port on the side of the device.
  2. Включете адаптера в стандартен стенен контакт.
  3. The "CHARGE" indicator light on the front panel will illuminate.
  4. Allow the device to charge until the "CHARGE" indicator light changes color or turns off, indicating a full charge.
  5. Alternatively, use the 12V car charger adapter for charging in a vehicle.

5.2. Първоначално включване

За да включите устройството:

6. Инструкции за работа

6.1. Satellite Dish Alignment

The primary function of the WS-6916 is to assist in aligning your satellite dish for optimal signal reception.

  1. Connect the LNB: Connect the LNB cable from your satellite dish to the F-connector input on the WS-6916 (refer to Figure 4.3).
  2. Изберете сателит: From the main menu, navigate to "Satellite Find" or "Satellite Installation" and select the desired satellite you wish to receive (e.g., Astra 19.2E, Hotbird 13E).
  3. Input Coordinates (Optional): If using the angle calculation feature, input your geographical coordinates to determine the optimal elevation and azimuth for your LNB.
  4. Adjust Dish Position: Slowly adjust the azimuth (horizontal angle) and elevation (vertical angle) of your satellite dish. Observe the signal strength and quality indicators on the WS-6916 display.
  5. Optimize Signal: Continue fine-tuning the dish position until the signal strength and quality readings are maximized. The acoustic signal will also indicate stronger reception.
  6. Сигнал за заключване: Once the signal is optimized, tighten your dish mounting bolts. The "LOCK" indicator light on the device will illuminate when a stable signal is acquired.
  7. Сканиране на канали: After successful alignment, you can perform a channel scan (blind scan, transponder scan, or full scan) to find available TV and radio channels.

6.2. Навигация в менюто

Use the navigation buttons (up, down, left, right) and the "OK" button to move through menus and confirm selections. The "MENU" button typically returns to the previous menu or the main menu, and "EXIT" can be used to exit current operations.

6.3. Актуализации на фърмуера

The device supports firmware updates via its USB port.

  1. Изтеглете най-новия фърмуер file from the official SATLINK support webсайт към USB флаш устройство.
  2. Insert the USB flash drive into the USB port on the WS-6916.
  3. Navigate to the "System Setting" or "Others" menu on the device.
  4. Select the "Firmware Upgrade" option and follow the on-screen prompts.
  5. Не изключвайте устройството по време на процеса на актуализиране.

7. Поддръжка

8. Отстраняване на проблеми

проблемВъзможна причинаРешение
Устройството не се включва.Батерията е изтощена или дефектна.Charge the battery using the provided adapter. Ensure the power switch is in the "ON" position.
Не е открит сигнал.Incorrect LNB connection, wrong satellite selected, or dish misalignment.Verify LNB cable connection. Ensure the correct satellite is selected in the menu. Adjust dish azimuth and elevation slowly.
Weak signal quality.Dish not precisely aligned, LNB faulty, or obstruction.Fine-tune dish alignment. Check LNB for damage. Ensure no physical obstructions block the signal path.
Дисплеят е празен или замръзнал.Софтуерна грешка или временна неизправност.Perform a soft reset by turning the device off and then on again. If the issue persists, consider a firmware update.

9. Технически спецификации

Характеристикадетайл
Номер на моделаWS-6916
МаркаСАТЕЛИНКА
Дисплей3.5" TFT LC Color Display
СъвместимостDVB-S, DVB-S2, MPEG-2, MPEG-4, FTA
ВръзкиAV Input, AV Output, HDMI Output, USB Port (1)
Режим на аудио изходСтерео
Поддържан аудио форматPCM
Voltage12 волта
Батерия7.4V 3000 mAh Rechargeable (Integrated)
Специални функцииSatellite measurement device, mute function for sound, flashlight
Препоръчителна употребаInstallation and positioning of satellite dishes

10. Гаранция и поддръжка

Information regarding specific warranty terms and conditions for the SATLINK WS-6916 is not provided in this manual. Please refer to the documentation included with your purchase or contact your retailer or the manufacturer directly for warranty details and technical support.

For firmware updates and additional resources, please visit the official SATLINK webсайт.

Свързани документи - WS-6916

предварителноview Satlink ST-5150 HD: Комбиниран сателитен метър, TV Finder - Технически спецификации и повечеview
Цялостен надview и технически спецификации за Satlink ST-5150 HD, преносим комбиниран измервателен уред за инсталиране и проверка на DVB-S/S2, DVB-T/T2 и DVB-C сателитни и наземни телевизионни сигнали.
предварителноview KPT-968Z 3.5" LED Handheld Multifunctional Satellite Finder & Monitor User Manual
Explore the features and specifications of the KPT-968Z, a 3.5-inch LED handheld multifunctional satellite finder and monitor. This guide covers satellite finding, CCTV camera testing, and device specifications.
предварителноview SATLINK SP-2100 HD Satellite Finder DVB-S/S2 MPEG-2/4 - Product Overview
Цялостен надview of the SATLINK SP-2100 HD, a portable digital satellite finder designed for DVB-S/S2 signal alignment and system checks. Features include a 3.5-inch TFT-LCD display, signal measurement tools, pre-programmed satellites, and media playback capabilities.
предварителноview Ръководство за потребителя на цифров сателитен търсач Satlink WS-6933
Ръководство за потребителя на цифровия сателитен търсач Satlink WS-6933, в което са описани подробно неговите функции, процедури за настройка, навигация в менюто и технически спецификации за насочване на сателитния сигнал.
предварителноview Ръководство за потребителя на сателитен локатор Satlink WS-6933
Ръководство за потребителя на сателитния локатор Satlink WS-6933, предоставящо инструкции за настройка, работа, сканиране на сигнала и технически спецификации за насочване на сателитите.
предварителноview Ръководство за потребителя на цифров сателитен търсач Satlink WS-6906 DVB-S FTA
Comprehensive user manual for the Satlink WS-6906 DVB-S FTA Digital Satellite Finder, covering device introduction, front panel functions, menu navigation, channel management, satellite configuration, system settings, tools, battery care, and technical specifications.