Въведение
SurgeX ESP SEQ-1U е 20 Amp/120V power sequencer and conditioner designed to protect and manage power for sensitive audio/video systems. It ensures proper power-up and power-down sequences, preventing damaging pops, hissing sounds, and excessive inrush currents. This manual provides essential information for the safe and effective operation of your SEQ-1U unit.
Информация за безопасност
ПРЕДУПРЕЖДЕНИЕ:
- Не излагайте устройството на дъжд или влага.
- Не отваряйте casing; вътре няма части, които потребителят може да обслужва сам. За всяко обслужване се обърнете към квалифициран сервизен персонал.
- Осигурете правилно заземяване, за да предотвратите токов удар.
- Изключете захранването, преди да правите каквито и да е връзки или да извършвате поддръжка.
- Това устройство е предназначено само за вътрешна употреба.
Продуктът е свършилview
Преден панел
Figure 1: Front Panel of the SurgeX ESP SEQ-1U
The front panel of the SEQ-1U features the SurgeX brand logo and model number. A central LCD display shows the unit's status, including voltage (e.g., "STATUS: ALL OFF 118V") and protection status (e.g., "PROTECTION: GOOD"). To the left of the display, a key switch with associated lock icons provides security. On the right, "SEL" and "ADJ" buttons are used for navigation and adjustment, alongside a prominent blue "POWER" button.
Ключови характеристики
- 20 Amp/120V Power Sequencer/Conditioner
- Adjustable 0-40 Second Sequence Delay
- 2 Always-on Outlets
- 3 Sequence Banks
- 8-outlet total capacity
- Advanced surge elimination
- EMI/RFI филтриране
- Extreme voltagд защита
Настройка
Монтаж в багажник
The SEQ-1U is designed for standard 19-inch rack mounting. Secure the unit using appropriate rack screws (not included) to ensure stability. Allow adequate ventilation around the unit.
Захранване
- Ensure the main power switch on the SEQ-1U is in the OFF position.
- Connect the unit's power cord to a dedicated 20 Amp, 120V AC power outlet.
- Verify that the power source is stable and within the specified voltage диапазон.
Свързващо оборудване
The SEQ-1U features two always-on outlets and three sequenced banks, each with two outlets.
- Connect equipment that requires constant power (e.g., network routers, media servers) to the "Always On" outlets.
- Connect equipment that should power on/off in a specific order (e.g., pre-ampлифиери, власт amplifiers, projectors) to the sequenced outlets (Banks 1, 2, and 3).
- Refer to your system's specific power-up/down requirements to determine the correct sequencing order for your devices.
Инструкция за работа
Включване/изключване
- Insert the key into the key switch on the front panel and turn it to the "ON" position.
- Press the blue "POWER" button. The unit will begin its power-up sequence, activating the sequenced banks with the configured delays.
- To power off, press the blue "POWER" button again. The unit will initiate the power-down sequence in reverse order.
- For complete power disconnection, turn the key switch to the "OFF" position and/or unplug the unit from the wall outlet.
Adjusting Sequence Delay
The SEQ-1U allows adjustment of the delay between sequenced banks (0-40 seconds).
- Use the "SEL" button to navigate through menu options on the LCD display.
- Use the "ADJ" button to modify the selected value (e.g., sequence delay time).
- Consult the on-screen prompts for specific instructions on saving your custom settings in non-volatile memory.
Информация за LCD дисплея
LCD дисплеят предоставя актуализации на състоянието в реално време:
- СТАТУС: Indicates the current state of the outlets (e.g., "ALL OFF", "BANK 1 ON") and the input voltage.
- ЗАЩИТА: Displays the status of the surge protection (e.g., "GOOD", "FAULT").
Поддръжка
- Почистване: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosols.
- Вентилация: Ensure that ventilation openings are not blocked. Proper airflow is crucial for preventing overheating.
- Управление на кабели: Keep power cables neatly organized and away from signal cables to prevent interference.
Отстраняване на неизправности
| проблем | Възможна причина | Решение |
|---|---|---|
| Устройството не се включва. | No power from wall outlet; key switch in OFF position; tripped circuit breaker. | Check wall outlet with another device; ensure key switch is ON; reset circuit breaker. |
| Equipment not powering on in sequence. | Incorrect connection to outlets; sequence delay set too long/short; unit in bypass mode. | Verify connections to sequenced banks; adjust sequence delay; ensure unit is in normal operating mode. |
| "PROTECTION: FAULT" displayed. | Internal protection circuit activated due to severe surge. | Disconnect all equipment, power cycle the unit. If fault persists, contact SurgeX support. |
Спецификации
- модел: SEQ-1U
- Входен обемtage: 120V AC
- Текущ капацитет: 20 Amp
- Изходи: 8 (2 Always-on, 6 Sequenced in 3 banks)
- Sequence Delay: Регулируеми 0-40 секунди
- Размери (Д x Ш x В): 21.7 x 15.05 x 6.7 инча
- Тегло: 16.65 паунда
- Тип материал: Мед
- Защита от пренапрежение: Advanced Series Mode® surge elimination
- Филтриране: EMI/RFI филтриране
Гаранция и поддръжка
For warranty information, technical support, or service inquiries, please contact SurgeX customer service. Refer to the official SurgeX webсайта или документацията за покупка за най-актуалните данни за контакт и гаранционни условия.
Онлайн ресурси: Visit the SurgeX official webсайт за ЧЗВ, регистрация на продукти и допълнителни помощни материали.
