1. Въведение и описание на продуктаview
The zaMel ETERO RWS-211C/12V/N is a wireless surface-mounted radio switch designed for controlling up to four electrical devices. Its robust IP56 rating ensures protection against jet water, making it suitable for outdoor installations. This device offers a reliable control solution for various applications such as garage doors, pumps, lamps, and more, with an impressive outdoor range of up to 300 meters.
Utilizing Keeloq® coding technology from Microchip Technology USA, the RWS-211C/12V/N ensures secure and interference-free bidirectional transmission. Each transmission is dynamically re-encrypted, providing enhanced safety. Operating at a frequency of 433.92 MHz with low transmission power (<5mW), this radio switch does not require state approval.
2. Ключови характеристики
- Wireless surface-mounted switch for outdoor installation (IP56 rated).
- Controls up to 4 independent electrical devices.
- Extended outdoor range of up to 300 meters.
- Bidirectional, coded, and interference-free Keeloq® transmission.
- Maximum connection power: 2000 W.
- Load on one channel: 16 A / 250 V AC 4000 VA / AC1.
- Работен температурен диапазон: -20°C до +35°C.
- Requires 12 V operating voltage.
3. Product Components and Visuals
Фигура 3.1: крайview of the zaMel RWS-211C/12V/N Radio Switch system, showing the main receiver unit, detachable antenna, and the four-button remote control. The receiver unit features four output indicators (K1-K4) and a 12V AC/DC power indicator.
Фигура 3.2: The zaMel RWS-211C/12V/N receiver unit shown held in a hand, illustrating its compact size and dimensions (approximately 4.7 inches or 12 cm in length). This view highlights the four cable glands at the bottom for secure wiring connections.
Фигура 3.3: Директен фронт view of the zaMel RWS-211C/12V/N receiver unit and its accompanying remote control. This perspective clearly shows the "zaMel" branding on both devices, the four indicator LEDs (K1-K4) on the receiver, and the numbered buttons (1-4) on the remote.
4. Настройка и инсталация
Before beginning installation, ensure all power sources are disconnected to prevent electrical shock. It is recommended that installation be performed by a qualified electrician.
4.1 Mounting the Receiver Unit
- Choose a suitable outdoor location for the receiver unit, ensuring it is within range of the devices to be controlled and the remote control. The IP56 rating allows for outdoor exposure.
- Secure the receiver unit to a flat, stable surface using appropriate screws through the mounting holes located at the corners of the casing.
- Attach the provided antenna to the designated connector on the receiver unit. Ensure it is securely fastened for optimal signal reception.
4.2 Кабелни връзки
The RWS-211C/12V/N requires a 12V AC/DC operating voltage. Use the cable glands at the bottom of the unit for secure and waterproof cable entry.
- Захранване: Connect a stable 12V AC/DC power supply to the designated terminals inside the receiver unit. Observe correct polarity if using DC.
- Връзки на устройството: Connect the electrical devices (e.g., garage door opener, lamp, pump) to the respective output channels (K1, K2, K3, K4) within the receiver. Each channel can handle a load of up to 16 A / 250 V AC (4000 VA). Refer to the internal wiring diagram for specific terminal assignments.
- Уверете се, че всички връзки са плътно затегнати и правилно изолирани.
4.3 Сдвояване на дистанционното управление
The remote control typically comes pre-paired, but if re-pairing is necessary or if you are adding new remotes, follow the manufacturer's specific pairing procedure, which usually involves a button sequence on the receiver unit and the remote.
5. Инструкции за работа
Once installed and powered, the zaMel RWS-211C/12V/N is ready for operation using the provided remote control.
- The remote control features four numbered buttons (1, 2, 3, 4), each corresponding to one of the four output channels (K1, K2, K3, K4) on the receiver unit.
- Pressing a button on the remote will toggle the state of the corresponding output channel on the receiver. For example, if channel K1 is connected to a lamp, pressing button '1' on the remote will turn the lamp ON, and pressing it again will turn it OFF.
- The indicator LEDs (K1-K4) on the receiver unit will illuminate when their respective channels are active.
- Ensure the remote control has fresh batteries for optimal performance.
6. Поддръжка
The zaMel RWS-211C/12V/N is designed for durability and requires minimal maintenance.
- Почистване: Periodically wipe the exterior of the receiver unit and remote control with a soft, damp плат. Не използвайте абразивни почистващи препарати или разтворители.
- Връзки: Occasionally check all wired connections to ensure they remain secure and free from corrosion, especially in outdoor environments.
- Смяна на батерията: Replace the remote control battery when its range decreases or it becomes unresponsive. Refer to the remote's specific instructions for battery type and replacement procedure.
- Антена: Ensure the antenna remains upright and unobstructed for best signal performance.
7. Отстраняване на проблеми
| проблем | Възможна причина | Решение |
|---|---|---|
| Устройството не реагира на дистанционното. |
|
|
| Намален работен обхват. |
|
|
| Receiver LEDs not illuminating. |
|
|
8. Технически спецификации
| Размери на продукта | 5.5 х 8.2 х 15.7 см; 560 гр |
| Номер на модела на артикул | RWS-211C/12V/N |
| Режим на работа | ВКЛ-ИЗКЛ |
| Текущ рейтинг | 16 Amps |
| Работен обемtage | 12V AC / DC |
| Тип контакт | Нормално отворен |
| Тип конектор | Кламер |
| Maximum Connection Power | 2000 W |
| Load per Channel | 16 A / 250 V AC 4000 VA / AC1 |
| Работен температурен диапазон | -20°C до +35°C |
| Честота на предаване | 433.92 MHz |
| Степен на защита | IP56 |
9. Гаранция и поддръжка
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official zaMel webсайт. Гаранционните условия може да варират в зависимост от региона.
Should you encounter any issues or require technical assistance, please contact zaMel customer support. Contact details are typically available on the manufacturer's webсайт или в опаковката на продукта.
