FVTLED WIFI-10*D45-RGB

FVTLED WiFi RGB Low Voltage LED Deck Lights Kit

Model: WIFI-10*D45-RGB

Марка: FVTLED

1. Въведение

This manual provides detailed instructions for the installation, operation, and maintenance of your FVTLED WiFi RGB Low Voltage LED Deck Lights Kit. This kit is designed to provide versatile and customizable lighting for both indoor and outdoor environments, featuring RGB color options, smart control via WiFi, and compatibility with voice assistants.

2. Информация за безопасност

Моля, прочетете и разберете всички инструкции за безопасност, преди да инсталирате или използвате този продукт. Неспазването на тези инструкции може да доведе до токов удар, пожар или други опасности.

  • Уверете се, че захранването е изключено преди инсталиране или поддръжка.
  • This product operates on DC12V low voltage. Do not connect directly to AC power without the provided power supply.
  • All lights and cables are IP67 waterproof, suitable for outdoor use. However, ensure all connections are securely tightened to maintain water resistance.
  • Do not modify the product or its components. Any modifications may void the warranty and create safety risks.
  • Keep the power supply unit in a dry, protected area, away from direct water exposure.
  • Консултирайте се с квалифициран електротехник, ако не сте сигурни относно някоя част от процеса на инсталиране.

3. Съдържание на пакета

При отваряне на опаковката проверете дали всички компоненти са налични и не са повредени:

  • 10 x LED Inground Lights (Model D45)
  • 1 x 12W LED Power Supply
  • 1 x LED WiFi Controller
  • 1 x 24-клавишно инфрачервено дистанционно управление
FVTLED Deck Lights Kit Components

Image 3.1: Contents of the FVTLED Deck Lights Kit, including 10 LED lights, power supply, WiFi controller, and remote control.

4. Настройка и инсталация

Follow these steps for proper installation of your FVTLED deck lights:

  1. Планиране: Determine the desired layout for your lights. The distance between each light is approximately 1 meter (3.28 ft). Ensure the total length of connected lights does not exceed the capacity of the power supply.
  2. Пробиване на отвори: Drill mounting holes of approximately Φ1.38 inches (35mm) in diameter. The light fixture itself has a diameter of Φ1.77 inches (45mm) and a height of 1.02 inches (26mm).
  3. Вмъкване на светлини: Carefully insert each LED deck light into the drilled holes. The spring clips on the sides will secure the light in place.
  4. Свържете светлини: Connect the lights in series using the male and female waterproof connectors. Ensure each connection is firmly pushed together and the screw cap is tightened to maintain the IP67 waterproof rating.
  5. Свързване с контролера: Connect the string of lights to the LED WiFi Controller.
  6. Свържете захранването: Connect the LED WiFi Controller to the 12W LED Power Supply.
  7. Включване: Включете захранващия блок в стандартен електрически контакт.
FVTLED Deck Light Dimensions and Wiring Diagram

Image 4.1: Detailed dimensions for drilling and a diagram illustrating the series connection of the LED deck lights to the driver.

Забележка: The distance between the light and the controller should be less than 3 meters for optimal performance.

5. Инструкции за работа

5.1. Работа с дистанционно управление

Включеното 24-клавишно инфрачервено дистанционно управление позволява основни функции:

  • ВКЛ./ИЗКЛ.: Включете или изключете осветлението.
  • Избор на цвят: Choose from various preset colors.
  • Регулиране на яркостта: Увеличете или намалете интензитета на светлината.
  • Избор на режим: Cycle through different dynamic lighting modes.

Дистанционното управление има ефективен обхват до 15 метра.

5.2. WiFi / Smart App Control

For advanced features and smart home integration, use the dedicated mobile application.

  1. Изтеглете приложението: Търсене на the companion app (e.g., 'Magic Home' or similar, as indicated in the product packaging or quick start guide) on your smartphone's app store (iOS or Android).
  2. Свързване с WiFi: Follow the in-app instructions to connect your LED WiFi Controller to your home WiFi network. This typically involves turning the lights on and off a few times to enter pairing mode, then selecting the controller from the app and entering your WiFi credentials.
  3. Избор на цвят: Use the app's color wheel to select from 16 million colors.
  4. Регулиране на яркостта: Precisely adjust the brightness level from 1% to 100%.
  5. Динамични функции: Explore various lighting modes such as gradual changes, cross fades, and strobe effects. You can also adjust the speed of these functions.
  6. Музикален режим: Synchronize the lights with music played from your device or through the app's microphone sensitivity feature.
  7. Camera Color Capture: Use your phone's camera to capture a color from your surroundings, and the lights will replicate it.
  8. Функция таймер: Set schedules for the lights to automatically turn on/off, change colors, or activate specific functions at designated times.
FVTLED Deck Lights controlled via smartphone app for group control

Image 5.1: Smartphone app demonstrating group control of multiple FVTLED deck lights.

FVTLED Deck Lights app interface showing music mode

Image 5.2: The app interface displaying the music mode feature, allowing lights to react to sound.

FVTLED Deck Lights app interface showing timer function

Image 5.3: The app interface demonstrating the timer function for scheduling light operations.

5.3. Гласово управление (Alexa и Google Home)

The FVTLED WiFi RGB Deck Lights are compatible with Amazon Alexa and Google Home for convenient voice control.

  1. Активиране на умение/действие: In your Alexa or Google Home app, search for and enable the corresponding skill or action for your FVTLED lights (e.g., 'Magic Home' or similar).
  2. Свързване на акаунт: Link your FVTLED app account with your Alexa or Google Home account.
  3. Открийте устройства: Помолете Alexa или Google Home да откриват нови устройства.
  4. Гласови команди: You can now control your lights using voice commands such as:
    "Alexa, turn on the deck lights."
    "Hey Google, change deck lights to blue."
    "Alexa, dim the deck lights to 50%."
Person using voice command 'Alexa, please turn on the lights' to control FVTLED deck lights on a patio.

Изображение 5.4: Бившample of using voice commands with Alexa to control the FVTLED deck lights in an outdoor setting.

5.4. Video Demonstration: WiFi Controller and App Features

Video 5.5: A comprehensive demonstration of the FVTLED WiFi Controller and its features, including app connectivity, color selection, dynamic modes, and timer settings.

6. Поддръжка

To ensure the longevity and optimal performance of your FVTLED deck lights, follow these maintenance guidelines:

  • Почистване: Periodically clean the surface of the lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents.
  • Проверка на връзката: Annually inspect all cable connections to ensure they remain tight and free from corrosion. Re-tighten waterproof caps if necessary.
  • Проверка на кабела: Check cables for any signs of damage, cuts, or fraying. Replace damaged cables immediately to prevent electrical hazards.
  • Захранване: Ensure the power supply unit is kept in a well-ventilated area and is not covered, to prevent overheating.

7. Отстраняване на проблеми

If you encounter issues with your FVTLED deck lights, refer to the following common problems and solutions:

  • Светлините не се включват:
    • Check if the power supply is properly plugged into a working outlet.
    • Verify all cable connections are secure and tightened.
    • Ensure the remote control or app is sending the 'ON' command.
    • Test the power supply with another compatible device if possible.
  • Проблеми с WiFi свързаността:
    • Ensure your smartphone is connected to a 2.4GHz WiFi network (5GHz networks are often not supported by smart devices).
    • Confirm the WiFi controller is within range of your router.
    • Try resetting the WiFi controller (refer to app instructions for specific reset procedures, often involves cycling power).
    • Verify that location services are enabled on your phone and allowed for the app during setup.
  • Дистанционното управление не работи:
    • Check the battery in the remote control (1 CR2 battery required, included).
    • Ensure there are no obstructions between the remote and the WiFi controller.
    • Confirm the remote is pointed directly at the IR receiver on the controller.
  • Inconsistent Light Colors/Brightness:
    • This can sometimes occur with long cable runs due to voltage drop. Ensure your setup adheres to recommended cable lengths.
    • Check for any loose connections that might be affecting power delivery to individual lights.

8. Спецификации

ХарактеристикаСпецификация
МаркаFVTLED
Име на моделаWIFI RGB Low Voltage LED Deck Lights Kit
Номер на модела на артикулWIFI-10*D45-RGB
Форма на осветителното тялоВдлъбнат
МатериалНеръждаема стомана, поликарбонат
ЦвятRGB (Многоцветен)
VoltageDC 12V
Уотtage0.5 Watts (Multi-color) / 0.2W (Single-color)
Изходен лумен12 LM (per light)
Ъгъл на лъча120°
IP рейтингIP67 (Lights and Cables)
Размери на продуктаΦ1.77"L x 1.77"W x 1.02"H (Φ45*H26mm)
Размер на отвора за монтажΦ1.38" (Φ35mm)
Cable Length (Per Light)1.64 ft (Double 0.5M)
Разстояние между светлините3.28 фута (1M)
Контролен методRemote, Amazon Alexa, Google Home, Wi-Fi App
БатерииНеобходима е 1 батерия CR2 (включена е за дистанционното)
Изисква се сглобяванеда

9. Гаранция и поддръжка

This FVTLED product comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact FVTLED customer service directly through their official webсайт или търговец на дребно, откъдето е закупен продуктът.

Свързани документи - WIFI-10*D45-RGB

предварителноview Инструкции за потребителя на FVTLED Mini WiFi LED контролер
Инструкции за потребителя за FVTLED Mini WiFi LED контролер, обхващащи параметрите на продукта, свързването на кабели, ключовите функции, настройката на Wi-Fi и нулирането до фабричните настройки.
предварителноview Ръководство за потребителя на интелигентно вградено осветление Rollin Light
This document provides instructions and details for the Rollin Light Smart Recessed Lighting 5/6 Inch - 6 Pack Wi-Fi RGB Color Changing LED Recessed Can Lights. Learn how to install and operate these dimmable, 1050LM downlights that work with Alexa, Google, and Siri.
предварителноview ENER-J Умни RGB феерични лампички SHA5326 - Ръководство за потребителя и настройка
Това ръководство предоставя подробни подробности за ENER-J Smart RGB Fairy Lights (модел SHA5326), включително неговите функции, технически спецификации, инструкции за настройка на приложението Enerjsmart и интеграция с гласови асистенти като Amazon Alexa и Google Assistant.
предварителноview Westek WiFi съвместими многоцветни Puck светлини: Ръководство за монтаж и експлоатация
Подробно ръководство за многоцветни светлинни шайби Westek с WiFi (PIP-RGB-WIFI, PIP-RGB-A). Обхваща инсталиране, управление от сензор за вълни, функции на приложението, настройка на Wi-Fi, работа, спецификации, предупреждения и информация за гаранцията.
предварителноview Govee RGB LED Strip Lights H6154 User Manual
This document provides safety instructions, an introduction, remote controller guide, installation steps, app pairing instructions, voice control guidance, specifications, and troubleshooting for the Govee RGB LED Strip Lights Model H6154.
предварителноview Tramsmart Fairy Lights User Manual
User manual for Tramsmart Fairy Lights, detailing specifications, IR remote control operation, and Smart Life app setup for smart home integration with Alexa and Google Home.