IKEA 602.172.28 Wall/Ceiling Bracket

1. Продуктът свършиview

The IKEA 602.172.28 Wall/Ceiling Bracket is designed to securely hold curtain rods, allowing for flexible curtain placement. Its adjustable design enables curtains to be hung either close to the window or further out, accommodating various window treatments and room layouts. This bracket is compatible with RÄCKA and HUGAD curtain rods and can be used to create single, double, or triple-layer curtain solutions.

Ключови характеристики:

• Adjustable curtain rod holder position.
• Includes two anti-slip liners: a thick liner for RÄCKA curtain rods and a thin liner for HUGAD curtain rods.
• Supports creation of double- or triple-layer curtain solutions with additional BETYDLIG curtain rod holders.

2. Компоненти

The IKEA 602.172.28 Wall/Ceiling Bracket consists of the following parts:

• Wallbracket/Hook: Made of Steel with Epoxy/polyester powder coating.
• възглавница: Made of Silicone rubber.
• Корица: Made of ABS plastic.
• Завийте: Made of Steel, Galvanized, Paint.

3. Настройка и инсталация

Follow these steps to properly install your IKEA 602.172.28 Wall/Ceiling Bracket:

1. Изберете място за монтаж: Determine whether you will mount the bracket on the wall or the ceiling. Ensure the surface is suitable for drilling and can support the weight of the curtains and rod.
2. Маркирайте отвори за пробиване: Hold the bracket in the desired position and mark the locations for the mounting screws. Use a level to ensure proper alignment.
3. Пробийте отвори: Drill pilot holes at the marked locations. Use appropriate drill bits and wall plugs for your wall or ceiling material (wall plugs are typically sold separately).
4. Защитна скоба: Attach the bracket to the wall or ceiling using the provided screws. Ensure it is firmly secured.
5. Insert Anti-slip Liner: Select the appropriate anti-slip liner for your curtain rod. Use the thick liner for RÄCKA curtain rods or the thin liner for HUGAD curtain rods. Insert the liner into the bracket's rod holder.
6. Insert Curtain Rod: Place your RÄCKA or HUGAD curtain rod into the bracket's holder.
7. Коригиране на позиция: The curtain rod holder position can be adjusted to hang curtains closer to or further from the wall/window. Loosen the adjustment screw, slide the holder to the desired depth, and then tighten the screw to secure it.
8. Add Additional Brackets (Optional): For wider windows or heavier curtains, install additional brackets for support. For double or triple-layer curtain solutions, add extra BETYDLIG curtain rod holders (sold separately) to the main bracket.

4. Операция

Once installed, the bracket requires minimal operation. The primary adjustable feature is the depth of the curtain rod from the mounting surface.

• Adjusting Rod Depth: To change how far the curtain rod extends from the wall or ceiling, locate the small screw on the side of the rod holder. Loosen this screw, slide the rod holder to the desired position, and then firmly tighten the screw to secure it.
• Inserting/Removing Rods: To insert or remove a curtain rod, simply slide it into or out of the bracket's holder. Ensure the anti-slip liner is correctly in place to prevent the rod from slipping.

5. Поддръжка

To ensure the longevity and proper function of your bracket, follow these simple maintenance guidelines:

• Почистване: Wipe the bracket clean with a soft, damp cloth. Use a mild detergent if necessary, then wipe dry. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Инспекция: Periodically check all screws and connections to ensure they remain tight. If any screws feel loose, tighten them carefully to prevent the bracket from becoming unstable.
• Anti-slip Liners: Ensure the silicone rubber cushion (anti-slip liner) is in good condition and properly seated within the bracket to prevent the curtain rod from slipping. Replace if damaged.

6. Отстраняване на проблеми

If you encounter any issues with your bracket, consider the following solutions:

• Curtain Rod Slipping:
  • Ensure the correct anti-slip liner (thick for RÄCKA, thin for HUGAD) is used and properly inserted.
  • Verify that the adjustment screw holding the rod in place is tightened securely.
• Bracket Feels Loose:
  • Check and tighten all mounting screws securing the bracket to the wall or ceiling.
  • Ensure appropriate wall plugs were used during installation for your specific wall material.
• Difficulty Adjusting Rod Position:
  • Loosen the adjustment screw sufficiently before attempting to slide the rod holder.
  • Уверете се, че никакви отломки не възпрепятстват плъзгащия се механизъм.

7. Спецификации

8. Гаранция и поддръжка

За информация относно гаранцията, връщането или допълнителна поддръжка на продукта, моля, обърнете се към официалния представител на IKEA. webили се свържете директно с отдела за обслужване на клиенти на IKEA. Запазете касовата си бележка като доказателство за покупка.