БЛС Т401

BLS T401 LED лампа за гардероб със сензор за движение - ръководство за потребителя

Модел: T401

1. Информация за безопасност

Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.

  • Не излагайте устройството на екстремни температури или пряка слънчева светлина.
  • Пазете устройството от вода и висока влажност.
  • Не се опитвайте да разглобявате или модифицирате устройството. Това може да анулира гаранцията и да представлява риск за безопасността.
  • Използвайте само предоставения кабел за зареждане или сертифициран USB-C кабел за зареждане.
  • Ensure the installation surface is clean and dry before attaching the light using adhesive methods.

2. Продуктът свършиview

The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.

BLS T401 LED Motion Sensor Closet Light

Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.

Ключови характеристики:

  • Супер ярко осветление: 200 lumens with 6000K Clean White Glow.
  • Безжична инсталация: No hard wiring required.
  • Сензор за движение: Automatically turns on when motion is detected in dark or low-light conditions.
  • Акумулаторна батерия: Built-in 4500mAh UL certified battery for extended use.
  • Множество опции за монтаж: Magnetic attachment, 3M adhesive tape, or screws.
  • 3-Mode Switch: OFF, ON, and AUTO modes for flexible operation.
BLS T401 LED Motion Sensor Closet Light dimensions and motion detection range

Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.

3. Настройка

The BLS T401 offers flexible installation options to suit various surfaces.

Методи за инсталиране:

  1. Магнитна приставка: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
  2. Залепваща лента: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
  3. Монтаж на винт: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Four-step diagram showing installation of BLS T401 LED light using adhesive tape and magnetic attachment

Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.

4. Инструкции за работа

The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.

Избор на режим:

  • ИЗКЛЮЧЕНО: The light remains off regardless of motion or ambient light.
  • НА: The light stays continuously on.
  • АВТОМАТИЧЕН: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.

Регулиране на сензора за движение:

The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.

Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.

5. Зареждане

The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.

Процес на зареждане:

  1. Locate the USB-C charging port on one end of the light.
  2. Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
  3. The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
  4. A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Comparison of BLS T401 battery life with other LED lights

Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.

6. Поддръжка

To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:

  • Почистване: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
  • Грижа за батерията: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
  • Съхранение: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.

7. Отстраняване на проблеми

If you encounter any issues with your BLS T401, refer to the following common problems and solutions:

проблемВъзможна причинаРешение
Светлината не се включва в режим AUTO.Insufficient ambient light (too bright), no motion detected, or low battery.Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery.
Светлината се изключва твърде бързо или остава включена твърде дълго.Motion sensor sensitivity or placement.Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long.
Светлината е слаба или трепти.Ниска батерия.Заредете напълно батерията.
Светлината не зарежда.Неизправен кабел за зареждане или източник на захранване.Опитайте друг USB-C кабел и/или друг USB източник на захранване.

8. Спецификации

Характеристикадетайл
МаркаBLS
Номер на моделаT401
Тип източник на светлинаLED
Яркост200 лумена
Цветна температура6000 Kelvin (Clean White)
Капацитет на батерията4500mAh Lithium Ion (UL Certified)
Източник на захранванеЗахранван от батерия
Размери на продукта15.1 см Д x 0.9 см Ш x 0.98 см В
Тегло на артикула8 унции
МатериалАкрилонитрил бутадиен стирен, алуминий
Контролен методSlide Switch (OFF/ON/AUTO)
Обхват на сензора за движениеUp to 10 feet, 120° detection angle
Тип инсталацияMagnetic, Adhesive, Screw Mount
Използване на закрито/външноНа закрито

9. Гаранция и поддръжка

BLS предлага a One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.

Свързани документи - T401

предварителноview BLS HV25 Visor with Integrated Helmet - Technical Specification
Detailed technical specifications for the BLS HV25 visor, a high-protection helmet compatible with BLS 2700next and 2800next PAPRs, designed for industrial safety.
предварителноview BLS 400/3 Celoobličejová maska: Technické údaje a vlastnosti
Podrobný přehled celoobličejové masky BLS 400/3, včetně jejích materiálů, technických specifikací, certifikací a vlastností pro bezpečnostní složky. Univerzální připojení RD-40 a vysoký ochranný faktor.
предварителноview Ръководство за рязане на трупи Forest Master BLS-3H
Подробно ръководство за лопатката за рязане на трупи Forest Master BLS-3H, обхващащо информация за монтаж, употреба, безопасност и гаранция. Научете как безопасно и ефикасно да режете множество трупи.
предварителноview Ръководство за потребителя на Bluetooth предавател/приемник Shenzhen Bo Lian Sheng BLS-B55
Подробно ръководство за потребителя за Shenzhen Bo Lian Sheng BLS-B55, универсален 3-в-1 Bluetooth предавател, приемник и USB аудио адаптер. Научете за настройката, режимите, спецификациите и съответствието с FCC.
предварителноview Ръководство за потребителя на SpeedyBee F7 35A BLS Mini Stack V1.0
User manual for the SpeedyBee F7 35A BLS Mini Stack, detailing its specifications, dimensions, package contents, connection procedures, flight controller and ESC layout, peripheral connections, app usage for configuration and firmware updates, and technical parameters.
предварителноview Stageworx BLS-315 Pro Lighting Stand B Kit Ръководство за потребителя
Ръководство за потребителя за StagКомплект стойка за осветление eworx BLS-315 Pro, с подробни инструкции за безопасност, характеристики, работа, настройка, демонтаж, технически спецификации и екологично изхвърляне.