Въведение
The DOVEET DR-41 Atomic Digital Wall Clock is designed to provide accurate time, date, and environmental information with ease. Featuring a large, easy-to-read LCD display, it automatically synchronizes with the WWVB atomic clock signal for precise timekeeping. This manual will guide you through the setup, operation, and maintenance of your new atomic clock and its wireless outdoor sensor.

Figure 1: The DOVEET DR-41 Atomic Digital Wall Clock with its accompanying wireless outdoor sensor.
Ключови характеристики
- Атомна точност: Built-in receiver for WWVB broadcast signal from NIST, Fort Collins, Colorado, USA, ensuring precise time synchronization daily.
- Jumbo 4.5" Tall LCD Time Display: Large, easy-to-read display showing time (hours, minutes, seconds), indoor and outdoor temperature, calendar, and day of week. Ideal for visibility from a distance.
- Безжичен външен сензор: Measures accurate indoor/outdoor temperature and humidity in °F or °C. Wireless range up to 328ft (100M) in open areas.
- Захранван от батерия: Main unit powered by 4 AA batteries, outdoor sensor by 2 AAA batteries (not included). Extended battery life up to 18 months due to efficient chip design.
- Гъвкаво разположение: Can be hung on a wall or placed on a table using the integrated kickstand.
Визуални функции

Figure 2: The clock features a significantly larger display compared to standard clocks, enhancing readability.

Figure 3: The wireless outdoor sensor offers a transmission range of up to 328 feet in open environments.

Фигура 4: Надview of the clock's display elements and rear control buttons for various functions.

Figure 5: The clock and sensor are battery-powered, offering long operational life.
Ръководство за настройка
- Инсталирайте батерии:
- Open the battery compartment on the back of the main clock unit. Insert 4 new AA batteries, observing polarity (+/-).
- Open the battery compartment on the wireless outdoor sensor. Insert 2 new AAA batteries, observing polarity (+/-).
- Ensure both units are powered on within 3 minutes of each other for successful pairing.
- Сдвояване на сензори: The outdoor sensor will automatically attempt to pair with the main unit. A signal strength indicator will appear on the clock's display once connected. If pairing fails, press the "CHANNEL" button on the main unit to re-register the channel, or re-insert batteries in both units.
- Atomic Time Synchronization (WWVB):
The clock will automatically attempt to receive the WWVB atomic signal from Fort Collins, Colorado. This usually occurs overnight. Place the clock in an area with good reception, away from large metal objects or electronic interference. A tower icon will appear on the display when the signal is successfully received.
To manually initiate atomic signal reception, press and hold the "DOWN/RCC" button for 3 seconds. The clock will begin searching for the signal.
- Задаване на часова зона: Press the "UP/ZONE" button repeatedly to cycle through the available time zones (EST, CST, MST, PST, AKST, HST) until your desired time zone is displayed.
- Избор на температурна единица: Press the "DOWN/RCC" button briefly to switch between Fahrenheit (°F) and Celsius (°C) for temperature display.
Видео ръководство за настройка
Video 1: Official DOVEET guide on setting up the atomic clock and its features.
Инструкция за работа
Информация за дисплея:
- Време: Large digits display hours, minutes, and seconds. AM/PM indicator is present for 12-hour format.
- Дата и ден от седмицата: Displays month, day, and the full day of the week.
- Температура и влажност на закрито: Shown on the left side of the lower display.
- Външна температура и влажност: Shown on the right side of the lower display, received from the wireless sensor.
- Atomic Signal Indicator: A tower icon indicates successful reception of the WWVB signal.
- Индикатор за лятно часово време: Displays when Daylight Saving Time is active.
- Индикатор за изтощена батерия: An icon will appear in the upper right of the screen when batteries are low.
Button Functions (Rear of Unit):
| Бутон | Функция (кратко натискане) | Function (Press & Hold) |
|---|---|---|
| НАБОР | Confirm setting in setting mode. | Enter time setting mode. |
| АЛАРМА | Switch between normal time and alarm time display. | Влезте в режим на настройка на алармата. |
| UP / ZONE | Advance value in setting mode; Cycle time zones. | (No specific long press function for normal operation) |
| DOWN / RCC | Switch temperature unit (°F/°C). | Initiate manual atomic signal reception. |
| КАНАЛ | Cycle through outdoor sensor channels (1, 2, 3, or auto-cycle). | Re-register outdoor sensor channel. |
Note: The clock can display readings from up to 3 outdoor sensors. Use the CHANNEL button to switch between them or enable auto-cycling.
Поддръжка
- Смяна на батерията: When the low battery indicator appears, replace all batteries in both the main unit and the outdoor sensor. It is recommended to use high-quality, non-leaking batteries (e.g., Lithium batteries) to prevent damage to the device, especially for long-term use.
- Почистване: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or chemicals, as they may damage the display or casing.
- Разположение на сензора: For optimal performance and longevity, place the outdoor sensor in a shaded area that is protected from direct sunlight and heavy rain. While the sensor is splash-proof, prolonged exposure to harsh weather conditions can affect its accuracy and lifespan.
Отстраняване на неизправности
- Няма дисплей или дисплеят е блед:
- Check battery polarity and ensure batteries are fresh. Replace all batteries if necessary.
- Outdoor Temperature/Humidity Not Displaying or Inaccurate:
- Ensure batteries in the outdoor sensor are fresh and correctly installed.
- Press the "CHANNEL" button on the main unit to re-establish connection or cycle through channels.
- Move the outdoor sensor closer to the main unit to improve signal strength. Avoid large metal objects or thick walls between the units.
- Ensure the sensor is not in direct sunlight, which can cause artificially high temperature readings.
- Atomic Time (WWVB) Signal Not Received:
- Place the clock near a window or in an open area, away from electronic devices that may cause interference.
- Manually initiate signal reception by holding the "DOWN/RCC" button for 3 seconds.
- Note that signal reception can be affected by atmospheric conditions, geographical location, and time of day (best reception is often overnight).
- Incorrect Date/Day of Week:
- Ensure the correct year is set if manually setting the time, as this can affect the calendar function. The atomic signal should correct this automatically once received.
Спецификации
| Характеристика | детайл |
|---|---|
| Марка | DOVEET |
| Номер на модела | DR-41 |
| Тип дисплей | Цифров LCD |
| Дисплей за време | Hours, Minutes, Seconds (4.5" tall numbers) |
| Температурен диапазон (на закрито) | Not specified, typically 0°C to 50°C (32°F to 122°F) |
| Температурен диапазон (на открито) | Not specified, typically -40°C to 70°C (-40°F to 158°F) |
| Диапазон на влажност | Not specified, typically 20% to 95% RH |
| Обхват на безжичния сензор | Up to 328 ft (100 M) in open air |
| Източник на захранване (основно устройство) | 4 x AA батерии (не са включени) |
| Източник на захранване (външен сензор) | 2 x AAA батерии (не са включени) |
| Размери на продукта | 14.3''W x 9.3''H x 1.3''D (approximate, from feature bullets) |
| Тегло на артикула | 2.61 паунда (1.19 килограма) |
| Материал | Акрилонитрил бутадиен стирен (ABS) пластмаса |
| Тип монтаж | Wall Mount or Tabletop (with kickstand) |
Гаранция и поддръжка
For warranty information or technical support regarding your DOVEET DR-41 Atomic Digital Wall Clock, please refer to the contact information provided on the product packaging or visit the official DOVEET webсайт. Запазете касовата си бележка за евентуални гаранционни рекламации.



