COMFAST CF-WR301S

Ръководство за потребителя на COMFAST CF-WR301S 300Mbps безжичен ретранслатор/рутер/точка за достъп

Model: CF-WR301S

1. Въведение

The COMFAST CF-WR301S is a versatile wireless networking device designed to enhance and extend your existing Wi-Fi coverage. It supports multiple operating modes, including Repeater, Router, and Access Point (AP) modes, providing flexible solutions for various network requirements. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.

COMFAST CF-WR301S device with two external antennas.

Figure 1: The COMFAST CF-WR301S device with its two external antennas.

2. Информация за безопасност

  • Уверете се, че устройството е включено в електрически контакт с правилната сила на звукаtage.
  • Не излагайте устройството на вода, влага или екстремни температури.
  • Избягвайте да поставяте устройството близо до източници на топлина или на пряка слънчева светлина.
  • Осигурете адекватна вентилация около устройството, за да предотвратите прегряване.
  • Не се опитвайте сами да отваряте или поправяте устройството. Свържете се с квалифициран персонал за сервизно обслужване.

3. Продуктът свършиview

The COMFAST CF-WR301S features a compact design with dual external antennas for improved signal reception and transmission. It includes LED indicators for power, Wi-Fi status, and signal strength, providing visual feedback on its operational status.

COMFAST CF-WR301S highlighting its compact design and key features.

Figure 2: The COMFAST CF-WR301S highlighting its compact design and key features like signal penetration, 300Mbps speed, 80m coverage, and efficient heat dissipation.

3.1 Физически характеристики

  • Антени: Two external 3dBi antennas for enhanced wireless coverage.
  • LED индикатори: Power (Green), Wi-Fi (Green/Red for signal strength).
  • WPS/RST Button: Used for WPS pairing or resetting the device to factory defaults (press for 5 seconds).
  • LAN порт: For wired connections in Access Point or Router mode.
Illustration showing the COMFAST CF-WR301S with its dual antennas, depicting how it enhances WiFi signal penetration through walls.

Figure 3: Illustration showing the COMFAST CF-WR301S with its dual antennas, depicting how it enhances WiFi signal penetration through walls for wider coverage.

4. Настройка

This section guides you through the initial setup of your COMFAST CF-WR301S. The device supports Repeater Mode and Access Point Mode.

4.1 Първоначално свързване

  1. Включване: Plug the CF-WR301S into a power outlet. Wait for the Power LED to turn green.
  2. Свържете се с устройството: On your computer or smartphone, search for available Wi-Fi networks. Connect to the network named CF-WR301S_xxxx (where xxxx are the last four digits of the device's MAC address). No password is required for the initial connection.
  3. Достъп Web Интерфейс: Отворете a web браузър и въведете 192.168.10.1 in the address bar. This will open the device's configuration page.
The COMFAST CF-WR301S plugged into a power strip, demonstrating its compact 'mini size'.

Figure 4: The COMFAST CF-WR301S plugged into a power strip, demonstrating its compact 'mini size' that does not obstruct adjacent outlets.

4.2 Repeater Mode Setup

Repeater mode extends the coverage of an existing Wi-Fi network.

  1. След достъп до web interface (192.168.10.1), select Режим на повторител.
  2. The device will scan for available Wi-Fi networks. Select the network you wish to extend from the list.
  3. Въведете паролата за Wi-Fi за избраната мрежа.
  4. Можете да изберете да запазите същия SSID (име на мрежата) или да създадете нов за разширената мрежа.
  5. Кликнете Кандидатствайте or Запазване. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.

4.3 Access Point (AP) Mode Setup

AP mode converts a wired internet connection into a wireless network.

  1. Connect an Ethernet cable from your router or modem to the LAN port of the CF-WR301S.
  2. Достъп до web interface (192.168.10.1) and select AP режим.
  3. Configure the new Wi-Fi network name (SSID) and password.
  4. Кликнете Кандидатствайте or Запазване. The device will restart. Once the Wi-Fi indicator turns green, the setup is complete.
A three-step visual guide demonstrating the setup process for the COMFAST CF-WR301S using a smartphone interface.

Figure 5: A three-step visual guide demonstrating the setup process for the COMFAST CF-WR301S using a smartphone interface, including connecting to the default SSID, accessing the web GUI, and selecting the WiFi signal to extend.

5. Режими на работа

5.1 Режим на повторител

In Repeater Mode, the CF-WR301S wirelessly connects to your existing router's Wi-Fi network and re-broadcasts it, effectively extending the signal to areas with poor coverage. This mode is ideal for eliminating Wi-Fi dead zones.

5.2 Режим на точка за достъп (AP)

In AP Mode, the CF-WR301S connects to your wired network via an Ethernet cable and creates a new wireless network. This is useful for adding Wi-Fi capability to a wired-only network or for creating a separate Wi-Fi network.

6. Поддръжка

  • Почистване: Използвайте мека, суха кърпа за почистване на устройството. Не използвайте течни почистващи препарати или аерозоли.
  • Актуализации на фърмуера: Periodically check the COMFAST official webсайт за актуализации на фърмуера, за да се осигури оптимална производителност и сигурност.
  • Разположение: For best performance, place the device in a central location, away from obstructions and sources of interference.
The COMFAST CF-WR301S with a magnified view of its side ventilation slots, illustrating its design for efficient heat dissipation.

Figure 6: The COMFAST CF-WR301S with a magnified view of its side ventilation slots, illustrating its design for efficient heat dissipation and stable operation.

7. Отстраняване на проблеми

  • Няма достъп web interface (192.168.10.1): Ensure your device is connected to the CF-WR301S's default Wi-Fi network. Try clearing your browser's cache or using a different browser.
  • No internet connection after setup: Verify that the main router has an active internet connection. In Repeater Mode, ensure you entered the correct password for the host Wi-Fi network. In AP Mode, confirm the Ethernet cable is securely connected and providing internet.
  • Weak signal or slow speed: Relocate the CF-WR301S closer to your main router. Ensure there are no major obstructions (thick walls, metal objects) between the devices.
  • Нулиране на устройството: If you encounter persistent issues, press and hold the WPS/RST button for approximately 5 seconds until the LEDs flash. This will restore the device to factory default settings.

8. Спецификации

Detailed technical specifications for the COMFAST CF-WR301S.

Figure 7: Detailed technical specifications for the COMFAST CF-WR301S.

ХарактеристикаОписание
Име на моделаCF-WR301S
Честота2.412~2.472GHz
Wireless StandardSupport IEEE802.11b/g/n standard
Безжична скорост300Mbps
Бутон1*WPS/RST Button (Press 5 seconds for RST)
ИндикаторPower Indicator (Green Color), WiFi Indicator (Green: Good Signal; Red: Weak Signal)
ШифрованеWPA-PSK/WPA2-PSK; WPA/WPA2
Режим на работаРежим на ретранслатор, режим на точка за достъп
Размер156*78*43mm (Measured manually with slight deviation)
Работна температура-10 С~40 С
Температура на съхранение-40 С~70 С
Работна влажност10%~90%RH без кондензация
Влажност на съхранение5%~90%RH без кондензация

9. Гаранция и поддръжка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official COMFAST website. If you encounter issues not covered in this manual, please contact COMFAST customer support for assistance.

Image displaying the contents of the COMFAST CF-WR301S package, including the device and its quick installation guide.

Figure 8: Image displaying the contents of the COMFAST CF-WR301S package, including the CF-WR301S device and its quick installation guide.

Свързани документи - CF-WR301S

предварителноview Ръководство за бърза инсталация на безжичен разширител/ретранслатор COMFAST
Ръководство за бърза инсталация на безжичния разширител/ретранслатор COMFAST (модел: CF-WR301S V3). Научете как да настроите устройството си, използвайки WPS или конфигурация на IP адрес, да отстраните често срещани проблеми и да разберете указанията за безопасност и поддръжка.
предварителноview COMFAST CF-WR301S V3: Бърза инсталация за екстензор WiFi
Инструкции за инсталиране и конфигуриране на WiFi разширител COMFAST CF-WR301S V3. Amplíe su cobertura WiFi de forma sencilla y rápida.
предварителноview Ръководство за бърза инсталация на безжичен разширител/ретранслатор COMFAST
Кратко ръководство за инсталиране на безжичния разширител/ретранслатор COMFAST, обхващащо структурата на продукта, стъпките за настройка, режимите на работа (точка за достъп, рутер, ретранслатор), WiFi настройките, IPv6 конфигурацията, настройката на Mesh мрежата и отстраняването на неизправности.
предварителноview Ръководство за бърза инсталация на COMFAST CF-WR301S V2 - Настройка на безжичен разширител
Ръководство стъпка по стъпка за инсталиране и настройка на вашия COMFAST CF-WR301S V2 безжичен разширител/ретранслатор, използвайки WPS или конфигурация на IP адрес. Включва информация за отстраняване на неизправности и гаранция.
предварителноview Ръководство за потребителя на безжичен ретранслатор COMFAST M0304351
Ръководство за потребителя на безжичния ретранслатор COMFAST M0304351, в което са описани подробно характеристиките на продукта, стъпките за монтаж, работата, често задаваните въпроси, гаранционните условия и декларацията за съответствие с изискванията на ЕС.
предварителноview Ръководство за бърза инсталация на безжичен разширител/ретранслатор COMFAST CF-XR186
Кратко ръководство за инсталиране на безжичния разширител/ретранслатор COMFAST CF-XR186, което подробно описва структурата на продукта, стъпките за настройка, режимите на работа, IPv6 настройките, Mesh настройките, състоянието на управлението на осветлението и често задаваните въпроси.