Въведение
The Fostex RM-3DT is a compact, high-quality active monitor speaker designed for professional audio environments, particularly for rack-mount installations. It features both Dante and balanced analog inputs, making it versatile for various studio and broadcast applications. This manual provides essential information for the proper setup, operation, and maintenance of your RM-3DT unit.
Фигура 1: Отпред view of the Fostex RM-3DT Active Monitor Speaker, showing the LED meter, headphone jack, and volume knob.
Ключови характеристики
- Accepts both Dante and Balanced Analog Inputs for flexible connectivity.
- Outputs either or both of any 2-channel digital signals extracted from the Dante network.
- Power-saving design incorporating a digital amplifier and switching power supply.
- 26-dot LED meter with selectable display modes: VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.
- Adjustable display brightness with four levels.
Какво има в кутията
Upon unpacking your Fostex RM-3DT, please ensure all the following items are present:
- Fostex RM-3DT Rack-Mount Active Stereo Monitor Speaker with Dante
- Захранващ кабел
- Ръководство на потребителя (този документ)
Настройка
1. Физическа инсталация
The RM-3DT is designed for standard 19-inch rack mounting. Ensure adequate ventilation around the unit to prevent overheating. Secure the unit firmly using appropriate rack screws.
2. Връзки
The RM-3DT offers both Dante network connectivity and traditional balanced analog inputs/outputs.
Figure 2: Rear panel of the Fostex RM-3DT, illustrating Dante IN, Analog Input (XLR), and Analog Thru Out (XLR) ports.
- Данте вход: Connect an Ethernet cable from your Dante network to the "Dante IN" port. The RM-3DT will appear as a device on your Dante Controller software.
- Аналогов вход: Use balanced XLR cables to connect your analog audio sources to the "ANALOG INPUT" (L/R) ports.
- Analog Thru Out: The "ANALOG THRU OUT" (L/R) ports provide a pass-through of the analog input signals, allowing you to route them to other equipment.
3. Захранване
Connect the supplied power cord to the AC IN receptacle on the rear panel of the RM-3DT and then to a standard AC power outlet. Ensure the power switch is in the "OFF" position before connecting.
Инструкция за работа
1. Включване / изключване на захранването
To power on the unit, flip the power switch on the rear panel to the "ON" position. To power off, flip the switch to "OFF".
2. Контроли на предния панел
Figure 3: Close-up of the front panel, highlighting the headphone jack, volume knob, and input/output selection buttons.
- Жак за ТЕЛЕФОНИ: Connect stereo headphones to this 1/4-inch (6.35mm) jack for private monitoring.
- Копче за силата на звука: Adjusts the output level of the built-in speakers and the headphone output.
- Бутон INPUT: Toggles between Dante and Analog input sources. The selected input will be indicated by an LED.
- Бутон ИЗХОД: Selects whether the monitor outputs the Dante signal, Analog signal, or a mix of both.
3. LED Meter Display
The 26-dot LED meter provides visual feedback on audio levels. You can configure its display mode and brightness using the DIP switches on the rear panel.
- Режими на показване:
- VU: Standard Volume Unit meter.
- VU+PEAK: Displays VU level with peak hold.
- VU+PEAK HOLD: Displays VU level with a longer peak hold.
- PEAK+PEAK HOLD: Displays peak level with peak hold.
- Регулиране на яркостта: The display brightness can be set to one of four levels via DIP switch settings.
4. Rear Panel DIP Switches
A set of DIP switches on the rear panel allows for advanced configuration of the RM-3DT's behavior. Refer to the labels next to the switches for specific functions.
Figure 4: Close-up of the rear panel, showing the DIP switches for various settings like Dimmer, Meter type, Mute, and Peak VU.
- ДИМЕР: Adjusts the brightness of the LED meter.
- МЕТЪР: Selects the LED meter display mode (VU, VU+PEAK, etc.).
- МЪК: Активира или деактивира функцията за заглушаване.
- PEAK VU: Configures specific peak VU settings.
Consult the detailed diagram on the unit's rear panel for precise DIP switch configurations.
Поддръжка
- Почистване: Използвайте мека, суха кърпа за почистване на външната част на устройството. Не използвайте течни почистващи препарати или абразивни материали.
- Вентилация: Ensure that the ventilation grilles are not obstructed to allow for proper airflow and prevent overheating.
- Съхранение: Ако съхранявате устройството за продължителен период от време, изключете го от захранването и го съхранявайте на хладно и сухо място.
Отстраняване на неизправности
| проблем | Възможна причина | Решение |
|---|---|---|
| Без захранване | Захранващият кабел не е свързан; Изключено захранване; Проблем с контакта. | Проверете свързването на захранващия кабел; Уверете се, че превключвателят за захранване е ВКЛЮЧЕН; Тествайте контакта с друго устройство. |
| Няма аудио изход | Incorrect input selected; Volume too low; Cable issues; Dante network problem. | Press INPUT button to select correct source; Increase VOLUME; Check all audio cables; Verify Dante network configuration in Dante Controller. |
| LED meter not displaying | Brightness set too low; Meter mode incorrect; No audio signal. | Adjust DIMMER DIP switch; Check METER DIP switch setting; Ensure audio signal is present. |
| Изкривен звук | Input level too high; Faulty cable; Speaker damage. | Reduce input signal level; Try different cables; Contact Fostex support if speakers are damaged. |
Спецификации
| Характеристика | детайл |
|---|---|
| Име на модела | Rack-Mount Active |
| Тип високоговорител | Монитор |
| Номер на модела на артикул | AMS-RM-3DT |
| Протокол за свързване | Dante (digital audio network) and balanced XLR (analog audio) |
| Размер на високоговорителя | 110 милиметра |
| Диаметър на високоговорителя | 3.15 инча |
| Режим на аудио изход | Стерео |
| Максимална изходна мощност на високоговорителя | 30 вата |
| Източник на захранване | Електрически с кабел |
| Размери на продукта | 5" Д x 20" Ш x 20" В |
| Тегло на артикула | 10.38 паунда |
| Цвят | черен |
| производител | Фостекс |
| UPC | 636827308977 |
Гаранция и поддръжка
The Fostex RM-3DT comes with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fostex website. For technical support, service, or further inquiries, please contact Fostex customer service through their official channels.
Можете да намерите повече информация и ресурси за поддръжка на Fostex Store on Amazon.
