Intel NUC11BTMi9

Intel NUC 11 Extreme Kit NUC11BTMi9 Gaming Barebone System User Manual

модел: NUC11BTMi9 | марка: Intel

Продуктът е свършилview

The Intel NUC 11 Extreme Kit (NUC11BTMi9) is a high-performance barebone mini PC designed for gaming and demanding applications. It offers uncompromised performance within a compact form factor, allowing users to customize it with their preferred RAM, storage, and operating system.

Intel NUC 11 Extreme Kit front angled view with RGB skull logo

Фигура 1: Преден ъгъл view of the Intel NUC 11 Extreme Kit, showcasing its compact design and the illuminated skull logo.

Съдържание на пакета

Преди да продължите с настройката, проверете дали всички елементи са налични в опаковката:

  • Intel NUC 11 Extreme Kit (NUC11BTMi9) Barebone System
  • Американски захранващ кабел
  • Документация (Ръководство за бърз старт, Информация за безопасност)

Note: Additional components such as RAM, storage drives, and operating system are sold separately and are required for full system functionality.

Ръководство за настройка

This section outlines the steps required to set up your Intel NUC 11 Extreme Kit. As a barebone system, it requires the installation of memory (RAM) and storage (SSD) before initial use.

1. Инсталиране на памет (RAM)

  1. Unscrew and remove the top cover of the NUC chassis.
  2. Locate the DDR4 SO-DIMM slots on the motherboard.
  3. Align the notch on the SO-DIMM module with the notch in the slot.
  4. Insert the module at a 45-degree angle and press down firmly until the retaining clips snap into place.
  5. Repeat for additional memory modules if applicable.

2. Installing Storage (SSD)

The NUC 11 Extreme Kit supports M.2 NVMe SSDs.

  1. Намерете M.2 слотовете на дънната платка.
  2. Поставете M.2 SSD в слота под ъгъл.
  3. Внимателно натиснете SSD устройството надолу и го закрепете с предоставения винт.
  4. The system also supports Serial ATA/600 interface for additional storage options.

3. Свързване на периферни устройства

Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports. The system features 12 USB ports for extensive connectivity.

Intel NUC 11 Extreme Kit rear view показва различни портове

Фигура 2: Задна част view of the Intel NUC 11 Extreme Kit, highlighting the array of input/output ports for connecting external devices.

  • Дисплей: Connect your monitor using HDMI or DisplayPort.
  • USB устройства: Use the available USB ports for keyboard, mouse, external drives, etc.
  • мрежа: Connect an Ethernet cable for wired network access, or use the integrated Wi-Fi.
  • аудио: Свържете високоговорители или слушалки към аудио жаковете.

4. Захранване

Connect the provided power cord to the NUC and then to a power outlet.

5. Инсталиране на операционна система

Once RAM and storage are installed, you will need to install an operating system (e.g., Windows 10, Linux) from a bootable USB drive or disc.

Инструкция за работа

This section provides basic instructions for operating your Intel NUC 11 Extreme Kit.

Включване/изключване

  • Включване: Press the power button located on the front of the unit. The power indicator light will illuminate.
  • Изключване:
    • Стандартно изключване: Use the operating system's shutdown function.
    • Принудително изключване: Press and hold the power button for 5-10 seconds until the unit powers off. Use this only as a last resort.
Intel NUC 11 Extreme Kit front view with illuminated skull logo and power button

Фигура 3: Отпред view of the Intel NUC 11 Extreme Kit, showing the power button and front panel connectivity options.

Свързване на USB устройства

The NUC 11 Extreme Kit offers numerous USB ports (up to 12) for connecting various peripherals. Devices can be connected or disconnected without needing to shut down the system.

Достъп до BIOS/UEFI

To access the BIOS/UEFI settings, power on the system and repeatedly press the F2 key during startup. This allows configuration of boot order, system settings, and hardware diagnostics.

Поддръжка

Proper maintenance ensures the longevity and optimal performance of your Intel NUC 11 Extreme Kit.

  • Почистване: Regularly clean the exterior with a soft, dry cloth. Use compressed air to clear dust from vents and fan areas to ensure proper airflow and prevent overheating. Ensure the system is powered off and unplugged before cleaning.
  • Софтуерни актуализации: Keep your operating system, drivers, and BIOS/UEFI firmware updated to the latest versions. Visit the official Intel support website for driver downloads specific to the NUC11BTMi9 model.
  • Вентилация: Ensure the NUC is placed in a well-ventilated area, away from direct sunlight or heat sources. Do not block the ventilation openings.
  • Архивиране на данни: Редовно архивирайте важни данни на външен диск или облачно хранилище, за да предотвратите загуба на данни.

Отстраняване на неизправности

This section provides solutions to common issues you might encounter with your Intel NUC 11 Extreme Kit.

Няма захранване / Системата не се включва

  • Ensure the power cord is securely connected to both the NUC and a working power outlet.
  • Проверете дали електрическият контакт работи, като включите друго устройство.
  • Ако използвате разклонител или предпазител от пренапрежение, уверете се, че е включен.

Няма изходен дисплей

  • Check that the monitor is powered on and the video cable (HDMI/DisplayPort) is securely connected to both the NUC and the monitor.
  • Опитайте друг видеокабел или монитор, ако има такъв.
  • Ensure RAM modules are properly seated in their slots. Reseat them if necessary.

Системата замръзва или се срива

  • Уверете се, че системата има адекватна вентилация и не прегрява.
  • Update your operating system and device drivers to the latest versions.
  • Изпълнете инструмент за диагностика на паметта, за да проверите за проблеми с RAM паметта.
  • Check the health of your storage drive.

Peripheral Not Detected

  • Опитайте да свържете периферното устройство към друг USB порт.
  • Уверете се, че драйверите на периферното устройство са инсталирани и актуални.
  • Рестартирайте системата.

Технически спецификации

Below are the key technical specifications for the Intel NUC 11 Extreme Kit (NUC11BTMi9).

Intel NUC 11 Extreme Kit with dimensions labeled

Фигура 4: Страна view of the Intel NUC 11 Extreme Kit, illustrating its physical dimensions.

Характеристика Спецификация
Номер на модела NUC11BTMi9
Процесор Intel Core i9-11900KB Octa-core (8 Core) @ 3.3 GHz
Memory (RAM) Type DDR4 SDRAM (Barebone - user installable)
Интерфейс за съхранение M.2 (SSD), Serial ATA/600
Графичен копроцесор Графика Intel UHD
Размер на оперативната памет на графичната карта 8 GB (Integrated)
Безжична връзка Bluetooth, WiFi
USB портове 12
Operating System (Pre-installed) None (Supports Windows 10)
Тегло на артикула 5 паунда
Размери на опаковката 21.1 x 15 x 13.6 инча
Цвят черен
Първа налична дата 13 октомври 2021 г

Гаранция и поддръжка

Intel provides a limited warranty for its NUC products. For detailed warranty information, technical support, driver downloads, and troubleshooting resources, please visit the official Intel support webсайт.

You can typically find support by searching for "Intel NUC support" or by visiting Intel's Official Support Page.

When contacting support, please have your product model number (NUC11BTMi9) and serial number ready.

Свързани документи - NUC11BTMi9

предварителноview Ръководство за потребителя на Intel NUC Kit NUC11PAKi Series
Ръководство стъпка по стъпка за инсталиране на Intel NUC Kit NUC11PAKi7, NUC11PAKi5 и NUC11PAKi3. Обхваща отваряне на шасито, инсталиране на памет и устройство за съхранение, VESA монтаж, свързване на захранването, инсталиране на операционна система и актуализации на драйвери.
предварителноview Известие за промяна на продукта на Intel 853587-00: Актуализации на процесори в кутия
Известие относно актуализации на ръководствата за процесори Intel в кутия, подробности за единна точка за контакт (SPoC) и таблици за съответствие с RoHS за Китай, засягащи различни процесори Intel Core и Xeon.
предварителноview BSP, базиран на Yocto Project*, за процесори Intel® Core™ от 11-то поколение на IoT платформи - Бележки към изданието MR8
Този документ предоставя официалните бележки за изданието за пакета за поддръжка на платки (BSP), базиран на проекта Yocto*, за процесори Intel® Core™ от 11-то поколение (Tiger Lake UP3) на IoT платформи, включващ ядро ​​5.10 и издание за поддръжка 8 (MR8). Той описва подробно хардуерните и софтуерните конфигурации, бележките за изданието на компонентите, известните проблеми и корекциите, свързани с разработчиците, работещи с IoT решенията на Intel.
предварителноview Техническа спецификация на продукта Intel® NUC NUC11TN Series
Подробни технически спецификации за платка, комплект и мини компютър Intel® NUC серия NUC11TN, обхващащи процесори, памет, графика, съхранение и свързаност.
предварителноview Бележки за изданието на Intel Yocto Project BSP за 11-то поколение Intel Tiger Lake-H IoT платформи
Бележки по изданието за пакета за поддръжка на платки (BSP), базиран на Yocto Project*, за процесори от 11-то поколение Intel® Core™ vPro®, серия Intel® Xeon® W-11000E и процесори Intel® Celeron® (Tiger Lake-H) на IoT платформи, ядро ​​5.10. Подробности за версиите на компонентите, функциите, известните проблеми и корекциите.
предварителноview Техническа спецификация на продукта за платки Intel® NUC NUC7i5BNB и NUC7i7BNB
Този документ предоставя подробни технически спецификации за платките Intel® NUC NUC7i5BNB и Intel® NUC NUC7i7BNB, обхващащи оформлението на платката, компонентите, конекторите, захранването и изискванията за околната среда, както и информация за BIOS. Предназначен е за доставчици, системни интегратори и инженери.