Въведение
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Инструкции за безопасност
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Не излагайте устройството на дъжд или влага, за да предотвратите пожар или токов удар.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Не се опитвайте сами да обслужвате устройството. Възложете всички дейности по обслужване на квалифициран сервизен персонал.
- Да се пази от деца.
Съдържание на пакета
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Захранващи кабели
- RCA кабели
- Противотежести
- Slipmats
- Ръководство за потребителя
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Настройка
1. Разопаковане и поставяне
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Изображение: Ъглова view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Свързване на аудио кабели
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Захранване
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Инструкция за работа
1. Включване и изключване
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Изображение: Над главата view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Възпроизвеждане на запис
- Поставете запис върху чинията.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Натиснете СТАРТ/СТОП бутон, за да започнете въртенето на плато.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The ОБРАТНО button allows for reverse playback of the record.
Поддръжка
1. Cleaning the Turntable
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Грижа за стилуса
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Отстраняване на неизправности
| проблем | Възможна причина | Решение |
|---|---|---|
| Без захранване | Захранващият кабел не е свързан; електрическият контакт е повреден | Проверете свързването на захранващия кабел; опитайте с друг контакт |
| Без звук | RCA кабелите не са свързани; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Бръмчащ шум | Ground wire not connected; Interference | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Неправилна скорост на възпроизвеждане | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Спецификации
- марка: Reloop
- модел: РП-7000 МК2
- Технология за свързване: С кабел
- Специални функции: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- материал: Пластмаса
- Тегло на артикула: 4.5 Kilograms (per turntable)
- цвят: Deep black or classic silver metallic
- Съвместими устройства: Високоговорител, слушалки
Гаранция и поддръжка
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop webсайт или се свържете с вашия местен дистрибутор. Запазете доказателството си за покупка за гаранционни рекламации.
За допълнителна помощ посетете Reloop Store on Amazon.
