SmallRig 3660B

SmallRig L-Bracket 3660B Instruction Manual for Sony Alpha Series Cameras

Comprehensive guide for installation, operation, and maintenance of your SmallRig L-Bracket.

1. Въведение

This manual provides detailed instructions for the proper use and care of your SmallRig L-Bracket 3660B. Designed for select Sony Alpha series cameras, this L-bracket facilitates quick transitions between horizontal and vertical shooting orientations and offers multiple mounting points for accessories.

SmallRig L-Bracket 3660B attached to a Sony Alpha camera

Image 1.1: SmallRig L-Bracket 3660B mounted on a Sony Alpha camera.

2. Съвместимост

The SmallRig L-Bracket 3660B is compatible with the following Sony Alpha camera models:

  • Sony A7 V
  • Sony A7R V
  • Sony A7 IV
  • Sony A7S III
  • Sony A1
  • Sony A7R IV
  • Sony A9 II

Забележка: When the L-bracket is attached, the LCD screen of the Alpha 7 IV / Alpha 7S can rotate up to 120 degrees.

Compatibility chart for SmallRig L-Bracket 3660B showing various Sony Alpha camera models

Image 2.1: Visual representation of compatible Sony Alpha camera models.

3. Съдържание на пакета

Проверете дали всички елементи са налични в пакета:

  • Baseplate (L-Bracket 3660B) x 1
  • Allen Wrench (integrated)
Diagram showing the SmallRig L-Bracket 3660B and its dimensions, along with package contents and specifications.

Image 3.1: Package contents and key dimensions of the L-Bracket.

4. Настройка и инсталация

4.1 Attaching the L-Bracket to Your Camera

  1. Align the L-bracket with the bottom of your camera.
  2. Secure the L-bracket to the camera using the 1/4"-20 screw at the bottom and the locating pin.
  3. Ensure the built-in silicone cushions on the baseplate and side plate pad are properly positioned to prevent scratches and twisting.
SmallRig L-Bracket 3660B attached to a Sony Alpha camera, showing the secure fit.

Image 4.1: Proper attachment of the L-Bracket to the camera body.

4.2 Battery Access

The L-bracket features a spindle spanner at the battery door, allowing for easy battery replacement without disassembling the entire grip.

Step-by-step guide on how to access the battery compartment with the SmallRig L-Bracket attached, showing the hinge arm mechanism.

Image 4.2: Illustrated steps for battery access with the L-Bracket.

4.3 Multiple Mounting Points

The L-bracket provides various mounting options:

  • Основна плоча: Features multiple 1/4"-20 threaded holes and a 1/4"-20 screw with a locating pin. Includes a built-in wrist strap hole for use with Hand Strap 3848 and a QD mount for attaching a QD strap buckle.
  • Странична плоча: Equipped with a 1/4"-20 threaded hole with a locating pin hole.
Diagram highlighting the various 1/4 inch-20 threaded holes, QD socket, strap slot, and integrated Allen wrench on the SmallRig L-Bracket.

Изображение 4.3: Крайview of the L-Bracket's multiple mounting points.

5. Инструкции за работа

5.1 Quick Switching Between Horizontal and Vertical Shooting

The base plate and side plate are Arca-Swiss standard compatible, allowing for rapid transitions between horizontal and vertical shooting modes. This L-bracket is also compatible with Arca-Type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.

Illustration showing a camera mounted on a tripod, demonstrating the quick switch from horizontal to vertical shooting using the L-Bracket.

Image 5.1: Demonstrating the quick switch functionality for shooting orientation.

5.2 Extendable Side Plate for Cable Access

The side plate can be adjusted by up to 25mm, providing space for cable access (e.g., HDMI) during vertical shooting. This feature enhances mounting flexibility.

Забележка: To access all ports, ensure the side plate is pulled out first.

Image showing the extendable side plate of the L-Bracket, illustrating how it can be extended by 25mm to allow cable access during vertical shooting.

Image 5.2: The extendable side plate feature for improved cable management.

5.3 Unobstructed Interface Access

The design of the L-bracket ensures that all camera interfaces, including ports and the LCD screen, remain accessible and unobstructed.

Four images demonstrating that the SmallRig L-Bracket does not block any camera interfaces, including the LCD screen, ports, and battery compartment.

Image 5.3: Visual confirmation of full access to camera interfaces.

5.4 Enhanced Grip

The L-bracket integrates with the camera body, providing a comfortable grip and leaving room for the little finger, which can improve handling during extended use.

6. Обучителни видеоклипове

The following video demonstrates a quick release mechanism, similar to the functionality provided by the SmallRig L-Bracket 3660B for rapid transitions between shooting orientations.

Video 6.1: Demonstration of a quick release system, illustrating principles applicable to the L-Bracket's design.

7. Поддръжка

  • Почистване: Use a soft, dry cloth to wipe the L-bracket. Avoid abrasive cleaners or solvents that could damage the finish.
  • Съхранение: Store the L-bracket in a dry, dust-free environment when not in use.
  • Инспекция: Periodically check all screws and connections to ensure they are secure. Tighten if necessary using the integrated Allen wrench.

8. Отстраняване на проблеми

  • Свободна кройка: If the L-bracket feels loose on the camera, ensure the 1/4"-20 screw is fully tightened and the locating pin is correctly engaged.
  • Blocked Ports: If a port is blocked, verify that the extendable side plate is fully extended.
  • LCD Screen Rotation Issue: Confirm that your camera model is listed in the compatibility section. Note that some models have a limited rotation angle (e.g., 120 degrees for Alpha 7 IV / Alpha 7S) when the L-bracket is attached.

9. Спецификации

Атрибутдетайл
Маркамалка платформа
Идент. № на модела3660B
Размери на продукта142.2 x 65.1 x 88.8 мм
Нетно тегло135 g ± 5 g
МатериалAluminum Alloy, Stainless Steel, Silicone, Genuine Leather
Цвятчерен
Съвместими устройстваSony A7 V/ A7R V / A7 IV / A7S III / A1 / A7R IV / A9 II

10. Гаранция и поддръжка

За информация относно гаранцията и обслужване на клиенти, моля, обърнете се към официалния уебсайт на SmallRig. webсайт или се свържете с вашия местен дистрибутор. Запазете касовата си бележка за покупка за гаранционни рекламации.

производител: SMALLRIG

ASIN: B09PTTQJHH

Свързани документи - 3660B

предварителноview Комплект батерия и зарядно за камера SmallRig NP-FW50 - ръководство за потребителя
Ръководство за потребителя за комплекта батерия и зарядно за камера SmallRig NP-FW50, с подробни спецификации, инструкции за зареждане, грижа за батерията и информация за гаранцията за съвместими с Sony NP-FW50 камери.
предварителноview SmallRig L-образна скоба за фотоапарати Sony Alpha - Инструкции за употреба
Operating instructions for the SmallRig L-Bracket designed for Sony Alpha 7R V, 7 IV, 7S III, 1, 7R IV, and 9 II cameras. Learn about its features, safety guidelines, and specifications.
предварителноview Монтажна плоча SmallRig MD5423 за въздухTag за фотоапарати Sony - Инструкции за употреба
Подробни инструкции за експлоатация на монтажната плоча SmallRig MD5423 Arca-Swiss, предназначена за фотоапарати Sony Alpha и FX серии, с вграден Air...Tag отделение, система за бързо освобождаване и опции за разширяване.
предварителноview SmallRig Camera Cage for Sony Alpha 7S III (2999) - Operating Instructions
Detailed operating instructions and specifications for the SmallRig Camera Cage (Model 2999) designed for the Sony Alpha 7S III camera. Learn about mounting points, safety guidelines, and product details.
предварителноview L-образна монтажна плоча SmallRig за Sony Alpha 1 II / Alpha 9 III - Инструкции за употреба
Инструкции за употреба на L-образната монтажна плоча SmallRig, предназначена за фотоапарати Sony Alpha 1 II и Alpha 9 III. Включва стъпки за монтаж, спецификации на продукта и съдържание на пакета.
предварителноview SmallRig Mount Plate for Sony Alpha 7C II / 7CR - Operating Instructions
Official operating instructions for the SmallRig Mount Plate (models 5481/5482) designed for Sony Alpha 7C II and Alpha 7CR cameras, featuring an AirTag slot and Arca-Swiss compatibility.