Baseus Super Mini Inflator Tyre Pump CRCQ000001 User Manual

1. Въведение

This manual provides detailed instructions for the safe and efficient operation of your Baseus Super Mini Inflator Tyre Pump, model CRCQ000001. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

Фигура 1: Отпред view of the Baseus Super Mini Inflator Tyre Pump, showing the digital display and control buttons.

2. Характеристики на продукта

• Компактен и преносим дизайн: Weighing approximately 480 grams with dimensions of 220x46x48mm, this inflator is designed for easy storage and transport.
• Бърза инфлация: Capable of inflating at 30 liters per minute, allowing for quick tire inflation. For example, a 175/65 R15 tire can be inflated from 2.3 bar to 2.5 bar in approximately 15 seconds.
• Предварително зададено налягане в гумите: Allows users to set a desired pressure value, and the inflator will automatically stop once the target pressure is reached.
• Accurate Digital Display: Provides real-time pressure readings and allows for precise pressure setting.
• Многоцелева употреба: Equipped with various modes for different inflation needs, including car tires, motorcycle tires, bicycle tires, and sports balls.
• Вграден манометър: Functions as both an inflator and a tire pressure gauge.

Фигура 2: Надview of the inflator's key features, emphasizing its compact size, fast inflation capability, preset tire pressure function, and accurate digital display.

Figure 3: The inflator shown in hand, illustrating its compact and portable design for emergency use.

3. Инструкции за безопасност

Observe the following safety precautions to prevent electric shock, explosion, fire, and/or property damage:

• Не оставяйте помпата без надзор по време на работа.
• Да се ​​пази от деца.
• Не използвайте помпата за надуване във влажни условия или в близост до запалими течности или газове.
• Ensure the inflation hose is securely connected to the valve before starting inflation.
• Avoid over-inflating tires. Always refer to the recommended pressure for your specific item (vehicle, bicycle, ball).
• Do not block the air vents during operation to prevent overheating.
• If the device makes unusual noises or becomes excessively hot, turn it off immediately and disconnect it.
• Съхранявайте устройството на хладно и сухо място, когато не го използвате.
• Use only the charging cable provided or recommended by the manufacturer.

4. Настройка

1. Първоначално зареждане: Before first use, fully charge the inflator. Connect the charging cable to the device's charging port and to a suitable USB power adapter. The battery indicator on the display will show charging status.
2. Прикрепете маркуч за въздух: Завийте здраво въздушния маркуч към изхода за въздух на помпата.
3. Изберете дюза: Choose the appropriate nozzle for the item you intend to inflate (e.g., Schrader valve for car tires, Presta valve adapter for some bicycles, needle for balls). Attach it to the end of the air hose.

5. Инструкции за работа

Фигура 4: Страна view of the inflator, highlighting the control panel with power, mode, and pressure adjustment buttons.

1. Включване: Натиснете и задръжте бутона за захранване (U) for a few seconds to turn on the device. The digital display will illuminate.
2. Изберете режим: Натиснете бутона за режим (M) to cycle through different inflation modes: Car, Motorcycle, Bicycle, and Ball. Each mode has a default pressure range.
3. Задаване на целево налягане: Use the '+' and '-' buttons to adjust the desired target pressure. The display will show the current pressure unit (PSI or BAR). Refer to your item's recommended pressure.
4. Свържете се с клапана: Securely attach the chosen nozzle and air hose to the item's valve. Ensure there are no air leaks. The display will show the current pressure of the item.
5. Начало на инфлацията: Натиснете бутона за захранване (U) briefly to start inflation. The pump will begin to operate, and the display will show the increasing налягане.
6. Функция за автоматично спиране: Надувателят ще спре автоматично, след като се достигне предварително зададеното целево налягане.
7. Ръчно спиране: To stop inflation manually at any time, press the power button (U) отново.
8. Прекъсване на връзката: Carefully disconnect the air hose from the valve. Some air may escape during disconnection, which is normal.
9. Изключване: Натиснете и задръжте бутона за захранване (U), за да изключите устройството.

Figure 5: The inflator in use, demonstrating the one-key preset and auto-stop inflation feature when connected to a car tire.

Figure 6: Illustration of the inflator's various modes and their typical pressure ranges for different items, including car, motorcycle, bicycle, and ball inflation.

6. Поддръжка

• Почистване: Wipe the exterior of the inflator with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the air vents are clear of dust and debris.
• Съхранение: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the air hose and nozzles organized to prevent damage.
• Грижа за батерията: За да удължите живота на батерията, избягвайте честото ѝ пълно разреждане. Зареждайте устройството редовно, дори ако не го използвате за продължителни периоди (например веднъж на всеки 3 месеца).
• Проверка на маркуча: Periodically check the air hose for cracks, kinks, or damage. Replace if necessary to ensure efficient and safe operation.

Фигура 7: Задна част view of the inflator, showing the air vents which should be kept clear for proper operation and cooling.

7. Отстраняване на проблеми

• Устройството не се включва: Ensure the battery is charged. Connect to a power source and try again. If the issue persists, contact customer support.
• Inflator not starting: Check if the target pressure is set correctly and is higher than the current pressure. Ensure the air hose is securely attached.
• Бавно напомпване или липса на изпускане на въздух: Verify that the nozzle is correctly attached to the valve and there are no leaks. Check if the air hose is kinked or blocked. Ensure the battery has sufficient charge.
• Неточно отчитане на налягането: Ensure the hose is fully connected to the valve without leaks. Calibrate the device if a calibration option is available (refer to specific product features if applicable).
• Прегряване на устройството: Stop operation immediately and allow the device to cool down. Ensure air vents are not blocked. Avoid continuous operation for excessively long periods.

8. Спецификации

9. Гаранция и поддръжка

За информация относно гаранцията или техническа поддръжка, моля, вижте гаранционната карта, включена в продукта, или посетете официалния уебсайт на Baseus. webсайт. Запазете касовата си бележка като доказателство за покупка.