1. Въведение
This manual provides detailed instructions for the installation, operation, and maintenance of your Hogar Atrio Zigbee Smart Doorlock. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.
2. Продуктът свършиview
The Hogar Atrio Zigbee Smart Doorlock offers multiple secure access methods, including fingerprint, passcode, RFID card, Hogar SE mobile application, and a traditional mechanical key. It integrates with your Zigbee home automation system for enhanced control and monitoring.
Image 2.1: Hogar Atrio Zigbee Smart Doorlock and its packaging.
Изображение 2.2: Предна част view of the Hogar Atrio Smart Doorlock, showing the keypad and handle.
3. Настройка и инсталация
The Hogar Atrio Smart Doorlock is designed for easy installation. For app access and full smart features, a Zigbee Home Controller is required and must be set up prior to configuring the lock's smart functions.
3.1 Professional Installation Service
Professional installation and demonstration services may be available. For scheduling, please contact support at +91 844 844 0789.
3.2 Първоначална настройка
- Install the lock hardware according to the included physical installation guide.
- Insert the required batteries into the indoor unit.
- Pair the smart doorlock with your Zigbee Home Controller following the controller's instructions.
- Download the Hogar SE app from your device's app store.
- Follow the in-app instructions to add and configure your smart doorlock.
4. Инструкции за работа
The Hogar Atrio Smart Doorlock provides multiple methods for unlocking and securing your door.
4.1 Отключване с пръстов отпечатък
The lock features a hypersensitive fingerprint reader. To unlock, place your registered finger on the sensor. The lock will disengage upon successful verification.
Image 4.1: Fingerprint sensor for biometric access.
4.2 Отключване с парола
Enter your registered passcode on the keypad, followed by the '#' key. The lock will disengage if the passcode is correct. Passcodes can be managed via the Hogar SE app.
Image 4.2: Keypad for passcode entry.
4.3 Unlocking with RFID Card
Present a registered RFID card to the designated RFID reader area on the lock. The lock will disengage upon successful card recognition. RFID cards can be activated or deactivated through the Hogar SE app.
Image 4.3: RFID card being used to unlock the door.
4.4 Unlocking via Hogar SE App
With the Hogar SE app installed and connected to your Zigbee Home Controller, you can remotely unlock your door from anywhere. Ensure your Zigbee controller is online and the lock is paired.
Image 4.4: Hogar SE App icon, used for remote access.
4.5 Unlocking with Mechanical Key
In case of power failure or electronic malfunction, the lock can be opened using the provided mechanical key. Insert the key into the keyhole and turn to unlock.
4.6 Интеграция с гласово управление
The Hogar Atrio Smart Doorlock supports voice control through compatible smart assistants like Amazon Alexa and Google Assistant when integrated with your Zigbee Home Controller. Follow the instructions provided by your smart assistant for setup.
Изображение 4.5: Примерample of voice control for unlocking the door.
5. Поддръжка
5.1 Смяна на батерията
The smart doorlock is powered by batteries. A low battery warning will be indicated on the lock or through the Hogar SE app. Replace all batteries promptly when this warning appears to ensure continuous operation. Use only recommended battery types.
5.2 Почистване
Почиствайте външната част на ключалката с мека, суха кърпа. Избягвайте използването на абразивни почистващи препарати или разтворители, тъй като те могат да повредят покритието и електронните компоненти.
6. Отстраняване на проблеми
- Заключването не отговаря: Check battery levels. If batteries are low, replace them. If the issue persists, try using the mechanical key.
- Пръстовият отпечатък не е разпознат: Ensure your finger is clean and dry. Re-register your fingerprint if necessary via the app.
- Паролата не работи: Verify the correct passcode is being entered. Check for any accidental changes in the Hogar SE app.
- Проблеми със свързаността на приложението: Ensure your Zigbee Home Controller is powered on and connected to the internet. Check the lock's connection status in the Hogar SE app.
- Low battery warning persists after replacement: Ensure new batteries are correctly inserted and are of the recommended type.
7. Спецификации
| Характеристика | детайл |
|---|---|
| Марка | Хогар |
| Модел | HC-SAC-DDL-ZB-BL-IN |
| Тип заключване | Smart Door Lock (Key Lock) |
| Специални функции | Fingerprint, Passcode, RFID, App Access, Mechanical Key, Easy to Install |
| Протокол за свързване | Зигби |
| Контролен метод | Приложение, контрол на пръстови отпечатъци |
| Източник на захранване | Батерия |
| Препоръчителни употреби | сигурност |
| Тип покритие | Полиран |
| стил | Модерен |
8. Информация за безопасност
- Always ensure the door is properly closed before engaging the lock.
- Не излагайте ключалката на екстремни температури или директни водни пръски.
- Keep mechanical keys in a secure location, separate from the door.
- Heed the low battery warning and replace batteries promptly to avoid being locked out.
- Проверявайте редовно за признаци на tampering or damage to the lock.
9. Гаранция и поддръжка
9.1 Гаранция
This product comes with a 15-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions.
9.2 Поддръжка на клиенти
For technical assistance, installation queries, or any other support needs, please contact Hogar customer service at +91 844 844 0789.
