Ръководство за потребителя на Bluetooth високоговорител за врата SHARP AQUOS Sound Partner AN-SX8

1. Въведение

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Продуктът свършиview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Фигура 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Настройка

3.1 Зареждане на устройството

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Включване/изключване

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Първоначално Bluetooth сдвояване

1. Ensure the AN-SX8 is powered off.
2. Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes rapidly, indicating pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Инструкции за работа

4.1 Bluetooth връзка

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX връзка

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Контрол на звука

• Натиснете Увеличаване на силата на звука (+) бутон за увеличаване на силата на звука.
• Натиснете Намали звука (-) бутон за намаляване на силата на звука.

4.4 Playback Control (Bluetooth Mode)

• Натиснете Възпроизвеждане/Пауза button once to play or pause audio.
• Натиснете двукратно Възпроизвеждане/Пауза бутон, за да преминете към следващата песен.
• Натиснете трикратно Възпроизвеждане/Пауза бутон за преминаване към предишната песен.

4.5 Call Handling (Bluetooth Mode)

• Натиснете Възпроизвеждане/Пауза натиснете веднъж, за да отговорите на входящо повикване.
• Натиснете Възпроизвеждане/Пауза button once during a call to end it.
• Натиснете и задръжте Възпроизвеждане/Пауза за 2 секунди, за да отхвърлите входящо повикване.

5. Поддръжка

5.1 Почистване

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Съхранение

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Грижи за батерията

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Отстраняване на проблеми

• Без захранване: Уверете се, че устройството е напълно заредено. Свържете го към източник на захранване и проверете индикатора за зареждане.
• Няма звук:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • If using Bluetooth, try disconnecting and re-pairing the device.
• Проблеми с Bluetooth връзката:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Изключете и включете Bluetooth на вашето устройство източник.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Изкривен звук:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Проверете аудио източника за проблеми с качеството.

7. Спецификации

8. Информация за безопасност

• Не излагайте устройството на вода, влага или екстремни температури.
• Избягвайте продължително слушане на висока сила на звука, за да предотвратите увреждане на слуха.
• Не се опитвайте да разглобявате, ремонтирате или модифицирате устройството.
• Да се ​​пази от деца и домашни любимци.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Гаранция и поддръжка

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

За допълнителна помощ, моля, посетете SHARP Support Webсайт (напрampвръзката, действителната връзка може да варира).