1. Въведение
This manual provides essential instructions for the safe and effective use, installation, and maintenance of your Technical Precision OL-5 LENSOMETER Replacement Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.
Продуктът е свършилview
The Technical Precision OL-5 LENSOMETER Replacement Light Bulb is designed as a direct replacement for the original bulb in OL-5 LENSOMETER devices. It provides reliable illumination necessary for the accurate operation of the LENSOMETER.
Какво има в кутията
- 1 x Technical Precision OL-5 LENSOMETER Replacement Light Bulb
Image 1: The Technical Precision OL-5 LENSOMETER Replacement Light Bulb. This image displays the clear glass bulb with a standard screw-in base, designed for the OL-5 LENSOMETER.
2. Настройка и инсталация
Безопасността на първо място: Before attempting any installation, ensure the LENSOMETER is completely powered off and unplugged from its power source to prevent electrical shock.
- Изключване: Disconnect the LENSOMETER from the main power supply.
- Access Bulb Compartment: Locate the bulb access panel or compartment on your OL-5 LENSOMETER. Refer to your LENSOMETER's specific manual if you are unsure.
- Отстранете старата крушка: Carefully unscrew or unclip the old bulb. Allow it to cool if it was recently in use. Dispose of the old bulb responsibly.
- Инсталирайте нова крушка: Gently screw the new Technical Precision OL-5 LENSOMETER Replacement Light Bulb into the socket. Do not overtighten. Ensure it is seated firmly.
- Защитено отделение: Close and secure the bulb access panel.
- Включване: Reconnect the LENSOMETER to the power supply and turn it on to test the new bulb.
3. Операция
Once installed, the replacement bulb operates as part of your OL-5 LENSOMETER's illumination system. Its function is to provide the necessary light for accurate measurements.
- Включване/изключване: The bulb will illuminate when the LENSOMETER is powered on, and turn off when the device is powered off.
- Яркост: The brightness is controlled by the LENSOMETER's internal circuitry and is not adjustable directly from the bulb.
4. Поддръжка
The Technical Precision OL-5 LENSOMETER Replacement Light Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Почистване: If the bulb's glass surface becomes dusty or smudged, gently wipe it with a clean, dry, lint-free cloth. Avoid using abrasive cleaners or excessive moisture. Ensure the bulb is cool and the LENSOMETER is unplugged before cleaning.
- Замяна: Replace the bulb when it burns out or if its light output significantly diminishes. The average lifespan is approximately 500 hours.
- Обработка: Always handle the bulb by its base to avoid transferring oils from your skin to the glass, which can reduce bulb life.
5. Отстраняване на проблеми
| проблем | Възможна причина | Решение |
|---|---|---|
| Крушката не свети. | Крушката е изгоряла. | Сменете крушката с нова. |
| Крушката не е поставена правилно. | Уверете се, че крушката е здраво завинтена в гнездото. | |
| LENSOMETER not receiving power. | Check power cord connection and LENSOMETER's power switch. | |
| Светлината е слаба или трептяща. | Крушката наближава края на живота си. | Сменете крушката. |
| Dirty bulb surface. | Clean the bulb surface as described in the Maintenance section. |
6. Спецификации
| Марка | Техническа прецизност |
| Номер на модела | OL-5 LENSOMETER-AZ-3KT3-2 |
| Номер на част | OL-5 LENSOMETER-AZ-3KT3-2 |
| Voltage | 120 волта |
| Уотtage | 15 вата |
| Среден живот | 500 часа |
| Дължина на крушката | 2.25 инча |
| Материал | Стъкло |
| Включени компоненти | Резервна част |
| ASIN | B0FGYYDL86 |
7. Гаранция и поддръжка
For specific warranty information or technical support regarding your Technical Precision OL-5 LENSOMETER Replacement Light Bulb, please contact Technical Precision directly. Refer to the packaging or the official Technical Precision webсайт за данни за контакт.
производител: Техническа прецизност
