HAKINAKU HD13 4-in-1 Plug-in Smoke and Carbon Monoxide Detector

1. Въведение

Thank you for choosing the HAKINAKU HD13 4-in-1 Plug-in Smoke and Carbon Monoxide Detector. This device is designed to enhance the safety of your home or travel environment by providing real-time monitoring of carbon monoxide (CO) concentration, smoke, temperature, and humidity. It features a convenient plug-and-play design with a built-in backup battery for continuous operation during power outages. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Важна информация за безопасност

ПРЕДУПРЕЖДЕНИЕ: This device is intended for residential use only. It is not designed for marine or recreational vehicle use. Installation of this device should not be used as a substitute for proper installation, use, and maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.

• Do not paint over the detector. Paint can clog the sensing chambers and prevent the unit from operating properly.
• Do not block the air vents on the detector. Ensure proper airflow for accurate readings.
• Test the detector weekly by pressing the test button.
• Never ignore any alarm. Investigate the cause and take appropriate action immediately.
• Keep the detector away from direct sunlight, high humidity areas, and areas with extreme temperatures.
• This device contains a lithium-ion battery. Do not attempt to replace the battery yourself. Contact customer support if battery issues arise.

3. Съдържание на пакета

• HAKINAKU HD13 4-in-1 Smoke & Carbon Monoxide Detector (1 unit)
• Ръководство на потребителя (този документ)

4. Характеристики на продукта

• 4-в-1 откриване: Integrated sensors for Carbon Monoxide (CO), Smoke, Temperature, and Humidity.
• Plug & Play дизайн: Compatible with 110-240V US-standard outlets for easy installation.
• Built-in 1000mAh Backup Battery: Provides 40-48 hours of operation during power outagес.
• Сензори с висока точност: Independent CO and smoke sensors for accurate real-time environmental monitoring.
• Ultra HD Color Screen Display: Clear display of CO levels (PPM), smoke status, temperature (°F), and humidity (%).
• Звукова и светлинна аларма: 85dB alarm with visual indicators for immediate alerts.
• Регулируема яркост: Screen brightness can be adjusted or turned off.
• 3D Porous Air Duct Design: Ensures sensitive and accurate detection of gas and smoke.

Figure 4.1: The detector's display showing real-time CO, smoke, temperature, and humidity readings.

Figure 4.2: Illustration of the detector's 1000mAh high battery capacity for long-lasting endurance.

5. Настройка

1. Разопаковайте: Внимателно извадете детектора от опаковката му.
2. Изберете местоположение: Choose a suitable location for installation. For optimal performance, place the detector in areas such as bedrooms, kitchens, living rooms, basements, hotel rooms, garages, or tool rooms. Avoid placing it near windows, doors, or vents where drafts could interfere with readings. Do not place it in dead air spaces, such as at the peak of a vaulted ceiling or in corners where air circulation is poor.
3. Plug In: Plug the detector directly into a standard 110V to 240V AC US-standard electrical outlet. Ensure the outlet is not controlled by a switch that could accidentally turn off power to the detector.
4. Първоначално включване: Upon plugging in, the device will perform a self-test and the display will illuminate. It may take a few minutes for the sensors to stabilize and begin accurate readings.
5. тест: After initial setup, press the 'Test' button (usually indicated by a speaker icon or 'M' for mute/test) to ensure the alarm sounds and the display functions correctly.

Figure 5.1: The HAKINAKU HD13 detector plugged into a standard electrical outlet.

6. Инструкции за работа

The HAKINAKU HD13 detector operates continuously once plugged in. The display provides real-time information about your environment.

6.1 Показване на надview

Figure 6.1: Close-up of the Ultra HD color screen display.

• CO (ppm): Displays the current Carbon Monoxide concentration in parts per million.
• дим: Показва наличието на дим.
• Температура (°F): Shows the ambient room temperature.
• Влажност (%): Displays the relative humidity level.
• Индикатор за батерията: Shows the status of the internal backup battery.
• Статус на алармата: Indicates if the alarm function is active or muted.

6.2 Функции на бутоните

The device features three control buttons on the front panel:

• Light Button (Sun icon): Press to adjust the screen brightness. Multiple presses cycle through different brightness levels, including off.
• Power Button (Circle with line icon): Press and hold to power the device on or off (when operating on battery backup). A short press may activate the display if it's in a low-power state.
• Test/Mute Button (Speaker icon): Press to test the alarm function. During an alarm, press to temporarily mute the alarm.

6.3 Алармени условия

The detector will sound an 85dB alarm and provide visual alerts on the display under the following conditions:

• Аларма за въглероден оксид (CO): Triggered when CO levels exceed safe thresholds.
• Противопожарна аларма: Triggered upon detection of smoke.

If an alarm sounds, evacuate the premises immediately and call emergency services. Do not re-enter until the area has been deemed safe by professionals.

Figure 6.2: The detector activating its sound and light alarm during a CO detection event.

7. Поддръжка

Regular maintenance ensures the longevity and proper functioning of your detector.

• Седмично тестване: Press the 'Test/Mute' button once a week to verify the alarm sounds.
• Почистване: Gently vacuum the detector's vents and exterior cover monthly using a soft brush attachment to remove dust and debris. Do not use cleaning solvents or sprays directly on the unit.
• Проверка на батерията: The built-in backup battery is designed to last the lifetime of the unit. The battery indicator on the display will show its charge level. If the battery level is consistently low despite being plugged in, contact customer support.
• Избягвайте замърсители: Do not expose the detector to excessive dust, dirt, grease, or chemicals, as these can impair sensor performance.

8. Отстраняване на проблеми

9. Спецификации

• Номер на модела: HD13
• марка: ХАКИНАКУ
• Източник на захранване: AC (110-240V compatible)
• Резервна батерия: Built-in 1000mAh Lithium Ion (included)
• Живот на батерията (резервно копие): Приблизително 40-48 часа
• Видове откриване: Carbon Monoxide (CO), Smoke, Temperature, Humidity
• Силата на звука на алармата: 85dB
• цвят: Бяло
• Тегло на артикула: Приблизително 4.8 унции (0.3 паунда)
• Размери на продукта: 3.42 x 1 x 3.42 инча
• производител: Shenzhen Huidu Technology Co., Ltd.
• UPC: 758321273831

10. Гаранция и поддръжка

For warranty information, technical support, or any questions regarding your HAKINAKU HD13 detector, please refer to the product packaging or contact HAKINAKU customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase for warranty claims.