DELL Command Configure Software User Manual

бележки, предупреждения и предупреждения

ЗАБЕЛЕЖКА: ЗАБЕЛЕЖКА показва важна информация, която ви помага да използвате по-добре вашия продукт.

ВНИМАНИЕ: ВНИМАНИЕ показва или потенциална повреда на хардуера, или загуба на данни и ви казва как да избегнете проблема.

ПРЕДУПРЕЖДЕНИЕ: ПРЕДУПРЕЖДЕНИЕ показва възможност за щети на имущество, лично нараняване или смърт.

© 2025 Dell Inc. или неговите дъщерни дружества. Всички права запазени. Dell Technologies, Dell и други търговски марки са търговски марки на Dell Inc. или нейните филиали. Други търговски марки може да са търговски марки на съответните им собственици.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

ЗАБЕЛЕЖКА: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Dell Command | Configure 4.10.1 или по-нова версия генерира 64–bit SCE с ограничения.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

теми:

• Версия
• Предвидена аудитория
• Предназначение на документа

Версия

Тази глава предоставя надview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Предварителна инсталационна среда на Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Таблица 1. Матрица на версиите

ЗАБЕЛЕЖКА: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Предвидена аудитория

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Предназначение на документа

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Достъп до Dell Command | Конфигурирайте инсталатора

Командата Dell | Конфигурирайте инсталацията file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Отидете на Поддръжка | Dell.
2. Под С кой продукт можем да ви помогнем, въведете Обслужване Tag на вашето поддържано устройство Dell и щракнете Изпратете, или щракнете върху Откриване на персонален компютър.
3. На страницата за продуктова поддръжка за вашето устройство Dell щракнете върху Драйвери и изтегляния.
4. Кликнете Ръчно намиране на конкретен драйвер за вас [модел].
5. Проверете Управление на системата квадратчето за отметка под Категория падащо меню.
6. Намерете Команда на Dell | Конфигуриране in list and select Изтегляне от дясната страна на страницата.
7. Намерете изтегления file на вашия компютър (в Google Chrome, file се появява в долната част на прозореца на Chrome) и стартирайте изпълнимия файл file.
8. Следвайте инструкциите на екрана.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

теми:

• Поддържани операционни системи за Windows
  
• Поддържани платформи
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Поддържани операционни системи за Windows

Таблица 2. Поддържани операционни системи

Поддържани платформи

Table 3. Supported platforms

Table 3. Supported platforms (continued)

ЗАБЕЛЕЖКА: Platforms must support WMI-ACPI BIOS for full functionality.

ЗАБЕЛЕЖКА: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

ЗАБЕЛЕЖКА: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

ЗАБЕЛЕЖКА: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Предпоставки

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

ЗАБЕЛЕЖКА:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Включете или изключете функциите на Windows екран.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Щракнете двукратно върху изтегления DUP, щракнете върху Да и след това щракнете върху ИНСТАЛИРАНЕ.
   Командата Dell | Показва се съветникът за конфигуриране на инсталацията.
2. Стартирайте съветника за инсталиране.
   За повече информация вижте Изпълнение на съветника за инсталиране.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Изпълнете следната команда:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Щракнете двукратно върху изтегления пакет за актуализиране на Dell (DUP) и щракнете върху Да.
2. Щракнете върху ЕКСТРАКТ.
   Показва се прозорецът Търсене на папка.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. до view извлеченото files, щракнете View Папка.
   Папката съдържа следното files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. За достъп до Dell Command | Конфигурирайте съветника за инсталиране, щракнете двукратно върху Command_Configure.msi.
6. Стартирайте съветника за инсталиране.
   За повече информация вижте Изпълнение на съветника за инсталиране.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Стартиране на съветника за инсталиране

To run the installation wizard for installing the Dell Command | Configure .msi file на вашето устройство:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Показва се съветникът за инсталиране.
3.  Щракнете Напред.
   Показва се екранът за лицензионно споразумение.
4. Прочетете лицензионното споразумение и щракнете върху Приемам условията в лицензионното споразумение и след това щракнете върху Напред.
   Показва се екранът Информация за клиента.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Показва се екранът за потребителска настройка.
6. Щракнете върху Напред, за да инсталирате Dell Command | Конфигурирайте CLI и GUI в директорията по подразбиране. Стандартната команда на Dell | Инсталационните директории за конфигуриране са:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   Показва се екранът Готов за инсталиране на програмата.
7. Щракнете върху Да.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Щракнете върху Готово.
   Ако Dell Command | Configure GUI е инсталиран успешно, прекият път за GUI се показва на работния плот.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

ЗАБЕЛЕЖКА: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

ЗАБЕЛЕЖКА: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Отидете до папката, където Dell Command | Инсталационната програма за конфигуриране е извлечена от пакета за актуализиране на Dell (DUP).
2. Open Command Prompt as administrator.
3. Изпълнете следната команда: msiexec.exe /i Command_Configure.msi /qn
   Командата Dell | Компонентите за конфигуриране се инсталират тихо на следните места:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Инсталиране с поддържани езици

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Китайски Тайван
• 1031 — немски
• 1033 - английски
• 1034 — испански
• 1036 — френски
• 1040 — италиански
• 1041 — японски
• 1043 — холандски
• 2052 — опростен китайски
• 3076 — Китайски Хонконг

ЗАБЕЛЕЖКА: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Отворете Контролен панел.
2. Отидете на Програми > Програми и функции.
3. Find Dell Command | Configure в списъка.
4. Right-click it and select Деинсталиране.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

ЗАБЕЛЕЖКА: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

ЗАБЕЛЕЖКА: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

ЗАБЕЛЕЖКА: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

ЗАБЕЛЕЖКА: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Изпълнете следните стъпки, за да надстроите Dell Command | Конфигурирайте (по-рано Dell Client Configuration Toolkit) до следващата версия:

1. Double-click the downloaded DUP, and then click ИНСТАЛИРАНЕ.
   Командата Dell | Стартира се съветникът за конфигуриране на инсталацията.
2. Стартирайте съветника за инсталиране и следвайте инструкциите, които се показват на екрана.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Изтеглете най-новата инсталация file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the fileи след това изпълнете следната команда:
   msiexec.exe /i Command_Configure.msi REINSTALL=ВСИЧКИ REINSTALLMODE=VOMUS
   ЗАБЕЛЕЖКА: Показва се екранът на съветника за инсталиране, последван от „По-стара версия на Dell Command | Configure е открит в тази система. Ако продължите, инсталаторът ще премахне по-старата версия и ще продължи да инсталира най-новата версия. Ако отмените инсталирането на най-новата версия, системата няма да бъде възстановена до предишната версия на Dell Command | Конфигуриране. Искаш ли да продължиш?" съобщение.
3. Следвайте инструкциите на екрана, за да надстроите.
   ЗАБЕЛЕЖКА: За тихо надграждане изпълнете следната команда: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Надграждане в папката по подразбиране

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Прегледайте папката, в която сте извлекли Dell Command | Конфигурирайте инсталатора от пакета за актуализиране на Dell (DUP).
2. Изпълнете следната команда: msiexec.exe /i Command_Configure.msi /qn
   Командата Dell | Компонентите за конфигуриране се инсталират тихо на следните места:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

теми:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Таблица 4. Поддържани операционни системи

Supported Platforms for Linux

Table 5. Supported platforms

ЗАБЕЛЕЖКА: Platforms must support WMI-ACPI BIOS for full functionality.

ЗАБЕЛЕЖКА: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

ЗАБЕЛЕЖКА:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. ЗАБЕЛЕЖКА:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Пътят за инсталиране по подразбиране е /opt/dell/dcc.

Предпоставки

• Работната станция трябва да работи на поддържана операционна система Linux.
• Изтеглете библиотеки openSSL 1.x, за да инсталирате и стартирате Dell Command | Конфигурирайте на Red Hat Enterprise Linux 8 и Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. от dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Разархивирайте file използвайки следната команда:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Разархивирайте file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Версия>_ .tar.gz съдържа следните пакети, които трябва да бъдат инсталирани в следния ред:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   ЗАБЕЛЕЖКА: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f инсталиране
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Пътят за инсталиране по подразбиране е /opt/dell/dcc.
   ЗАБЕЛЕЖКА: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f инсталиране

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

ЗАБЕЛЕЖКА: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

За да деинсталирате Dell Command | Конфигурирайте на системи, работещи с Red Hat Enterprise Linux 8 или 9, изпълнете командите в следния ред:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

ЗАБЕЛЕЖКА: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. За да деинсталирате Dell Command | Конфигуриране и премахване на конфигурация files и временни files, run the following command: dpkg –purge command-configure
2. За да деинсталирате Hapi и да премахнете конфигурацията files и временни files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Надстройте версията на Dell Command | Конфигурирайте в системата.

ЗАБЕЛЕЖКА: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files и папки в системата. The files и папките нямат функционално въздействие.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Разархивирайте file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Разархивирайте file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. За да надстроите, изпълнете следната команда:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. За да проверите текущата команда Dell | Конфигурирайте версията, отидете на инсталационния път по подразбиране и стартирайте:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Тази глава предоставя надview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

теми:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

ЗАБЕЛЕЖКА: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Предпоставки

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server полезни товари.

Уверете се, че са изпълнени следните изисквания:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Показва се съветникът за инсталиране.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Щракнете Напред.
4. Щракнете върху Инсталиране, за да започнете инсталацията.
   The installation completion wizard is displayed.
5. Щракнете върху Готово, за да завършите инсталацията.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   ЗАБЕЛЕЖКА: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file при URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   ЗАБЕЛЕЖКА: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file със следното:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   „Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   ЗАБЕЛЕЖКА: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   ЗАБЕЛЕЖКА: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

ЗАБЕЛЕЖКА: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Създаване на среда за предварително инсталиране на стартиращо изображение с помощта на Windows PE 10.0 и 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. От Microsoft webсайт, изтеглете и инсталирайте Windows ADK на клиентската система.
   ЗАБЕЛЕЖКА: Докато инсталирате изберете само Инструменти за внедряване и Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Инсталирайте Dell Command | Конфигуриране.
4. Интегрирайте Dell Command | Конфигурирайте структурата на директорията в ISO file за създаване на стартиращо ISO изображение.

Интегриране на Dell Command | Конфигурирайте структурата на директорията в ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Инсталирайте операционната система Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Отворете командния ред с администраторски права.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ЗАБЕЛЕЖКА: Уверете се, че пътят, който се използва в командата, е този на Dell Command | Конфигуриране на папка.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Ресурси и подкрепа

Можете да получите достъп до необходимите документи, като изберете вашия продукт.

1. Отидете на Поддръжка | Dell.
2. Кликнете Разгледайте всички продукти.
3. Кликнете Software & Solutions.
4. Кликнете Управление на клиентски системи.
5. Кликнете Dell Command | Configure.
6. Кликнете Изберете този продукт.
7. до view необходимите документи, щракнете върху името на необходимия продукт и номера на версията.

ЗАБЕЛЕЖКА: Ако нямате активна интернет връзка, можете да намерите информация за връзка относно вашата фактура за покупка, опаковъчен лист, сметка или продуктов каталог на Dell.

Dell предоставя няколко опции за поддръжка и обслужване онлайн и по телефона. Наличността варира според държавата или региона и продукта и някои услуги може да не са налични във вашия район. За да се свържете с Dell за проблеми с продажбите, техническата поддръжка или обслужването на клиенти:

1. Отидете на Поддръжка | Dell.
2. Изберете вашата категория поддръжка.
3. Проверете вашата страна или регион в Изберете държава/регион падащ списък в долната част на страницата.
4. Изберете подходящата услуга или връзка за поддръжка въз основа на вашите нужди.

Документи / Ресурси

DELL Command Configure Software [pdf] Ръководство за потребителя Command Configure Software, Configure Software, Software

Референции

• Ръководство за потребителя